VS-ST300C18C1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also known as silicon control rectifiers (SCRs), are components that control electric current in industrial settings. The VS-ST300C18C1 is a specific type of thyristors designed to handle high-power, high-current power applications. This article will discuss the application field and working principle of the VS-ST300C18C1.

Application Field

The VS-ST300C18C1 is a high-voltage, high-power thyristor primarily used in industrial applications. It is specifically designed for high-current applications and can handle up to 300A, making it ideal for motor drives and battery chargers. Additionally, it is suitable for use in energy converters, battery management systems and AC motor speed control for electric vehicles.

The VS-ST300C18C1 is also capable of operation in a wide range of temperatures, making it suitable for use in extremely hot or cold environments. It is also capable of withstanding high levels of vibration, making it ideal for use in industrial equipment where vibrations are common.

Working Principle

Like other thyristors, the VS-ST300C18C1 is an electrostatic device that functions as an electrical switch. It is designed to be triggered by a low current, allowing it to control or switch higher currents or voltages. It works using five distinct stages: blocking, turn-on, conduction, turn-off, and recovery.

In the blocking stage, the thyristor is in its ‘off’ state. In other words, it is not allowing any current to flow through it. To move to the turn-on stage, a low current is applied to the thyristor’s gate, which causes a large current to flow into the anode of the thyristor and turn it ‘on’.

In the conduction stage, the thyristor continues to allow current to flow through it as long as the anode current remains above a certain level. If the anode current falls below this level, the thyristor will move to the turn-off stage. In the turn-off stage, the thyristor will stop allowing current to flow and the anode voltage will go to zero.

In the recovery stage, the voltage or current drops below the triggering level and the thyristor is once again in the blocking stage. The thyristor can then be triggered again to repeat the cycle.

The VS-ST300C18C1 is a robust, reliable, and efficient thyristor for industrial uses. Its wide application range and high power capabilities make it an excellent choice for controlling high currents or voltages in industrial settings. It is also capable of withstanding extreme temperature and vibration, making it suitable for use in harsh conditions.

The specific data is subject to PDF, and the above content is for reference