Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

A silicon-controlled rectifier (SCR), also known as a four-layer diode, is an electronic component used for power control and for generating, controlling, and switching electric signals. SCRs are used in many applications involving switching of high electrical power, such as electric motors, inverters, and power supplies. They are also used in many circuits that require low-power control of DC signals.

The VS-ST300C20L0 is a very popular model of SCR and is used in a wide range of applications in industry and at home. The VS-ST300C20L0 is a three-terminal device designed to control high-power loads. It is a thyristor with an integrated power detector and temperature protection. The VS-ST300C20L0 is a thyristor module that contains 2 pairs of SCRs in a single package.

Application Field of VS-ST300C20L0

The VS-ST300C20L0 SCR module is widely used in motor control, temperature control, power supply, energy saving, and energy management systems. It is also used in power conversion and distribution systems, lighting systems, heat pumps, electric vehicle charging systems, welding equipment, electric heating systems, and in many other applications that require high-power switching.

The VS-ST300C20L0 is suited for heavy-duty applications due to its ability to switch high power and its high surge capability. It has an on-state current rating up to 300 amps, a blocking voltage rating up to 600 volts, and a repetition peak off-state current rating up to 20 amps.

The VS-ST300C20L0 is a good choice for high reliability applications due to its temperature protection, overvoltage protection, overcurrent protection, and short-circuit protection features. It is also RoHS compliant and offers a high level of protection from overcurrent and overheating.

Working Principle of VS-ST300C20L0

The working principle of the VS-ST300C20L0 is very simple. When a voltage is applied to the gate, the device becomes conductive and allows a current to flow between the Anode and Cathode. The current then flows through the load, which will in turn switch the load on or off depending on the configuration.

The main operation of the SCR consists of three modes which are the forward blocking, forward conduction, and reverse blocking. When a voltage is applied to the gate, the SCR turns on and enters into forward conduction mode, allowing a current to flow from the Anode to the Cathode. Once current is flowing, the SCR will remain in the on state until the current is reduced to zero. This is known as the holding current. If the current is increased beyond the maximum rating of the device, the SCR will enter into reverse blocking mode, preventing any further current flow.

The VS-ST300C20L0 is a bidirectional device, meaning current can flow in either direction between the Anode and Cathode regardless of the polarity of the applied voltage. Once the current is reduced to zero and the voltage is equal to zero, the SCR will enter back into the forward blocking mode, shutting off power to the load.

The VS-ST300C20L0 is capable of withstanding peak off-state voltage of up to 600V and repetition peak off-state current of up to 20A. It is also RoHS compliant and offers protection from overcurrent and overheating. The VS-ST300C20L0 is a suitable choice for applications which require switching of high power and a high level of reliability.

The specific data is subject to PDF, and the above content is for reference