VS-ST303C08CFN1

Current - On State (It (RMS)) (Max):	1180A
Supplier Device Package:	TO-200AB (E-Puk)
Package / Case:	TO-200AB, E-PUK
Mounting Type:	Chassis Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	6690A, 7000A
Current - Off State (Max):	50mA
Current - Hold (Ih) (Max):	600mA
Series:	--
Current - On State (It (AV)) (Max):	620A
Voltage - On State (Vtm) (Max):	2.16V
Current - Gate Trigger (Igt) (Max):	200mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionThyristors are a type of switching device that uses a semiconductor material to control and regulate the flow of electrical current. The most basic type of thyristor is the silicon-controlled rectifier (SCR), which consists of three layers of semiconductor material called the emitter, base, and collector. SCRs are used in a variety of applications, including motor control and power conditioning, over-current and over-voltage protection, and the generation of high-frequency signals. The VS-ST303C08CFN1 is a type of SCR that is used specifically for high-speed switching applications, such as those found in the automotive and industrial sectors. This article will discuss the application field and working principle of the VS-ST303C08CFN1.Application Field of VS-ST303C08CFN1The VS-ST303C08CFN1 is a fast, low-cost, low-power SCR that is used for high-speed switching in applications such as automotive electronics. It is ideal for applications that require high-speed switching capability and low signal propagation delays, such as engine and transmission control systems. The device can also be used in high power applications, such as motor control, power control, and power quality management, as well as in power protection applications. Additionally, it is suitable for high-frequency switching applications, such as the generation of high-frequency signals.Working Principle of VS-ST303C08CFN1The working principle of the VS-ST303C08CFN1 is based on the concept of a three-layer semiconductor structure, where one of the layers (the base) is used to control the flow of current through the other two. The collector and the emitter are connected to a power source, and a voltage is applied to the base of the SCR. This voltage, called the “gate voltage”, triggers the SCR, which causes it to turn “on” and start conducting current. The amount of current that flows through the SCR is regulated by adjusting the voltage applied to the base. Once the SCR is turned on, it will remain on until the current that is flowing through it drops below a certain value, at which point it will turn off again.ConclusionThe VS-ST303C08CFN1 is a type of SCR that is used specifically for high-speed switching applications. Its application field includes automotive electronics, motor control, power control and power quality management, power protection, and the generation of high-frequency signals. The working principle of the VS-ST303C08CFN1 is based on the concept of a three-layer semiconductor structure, where one of the layers (the base) is used to control the flow of current through the other two. The device is triggered by applying a gate voltage, which causes it to turn “on” and start conducting current.

The specific data is subject to PDF, and the above content is for reference