VS-ST330C14C0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs are a type of semiconductor used as switches and controllers in a variety of applications. One such example is the VS-ST330C14C0, which is a silicon controlled rectifier (SCR) with a high current capacity and low forward voltage drop. The VS-ST330C14C0 is ideal for use in switching and control applications such as AC motor control, DC/DC power conversion, LED lighting control, inrush current limiting, and other applications where current switching and control are required.

The VS-ST330C14C0 is a 3-terminal current-controlled device with an operating voltage of 400V. It has a Cathode (K) and two Anodes (A1 and A2). The Cathode is connected to the gate, which is a negative voltage terminal, and the Anodes are connected to positive voltage terminals. When a negative voltage is applied to the gate, the device turns “on” and begins to conduct current. When the voltage is removed, the device turns back “off” and stops conducting current.

The VS-ST330C14C0 has an On-State Voltage of 1.5V to 2V, an Off-State Voltage of 40V to 50V, an On-State Resistance of 0.75 Ω to 1.5 Ω, an Off-State Leakage Current of 5mA, and a Maximum Gate Trigger Current of 5mA. The maximum Average On-State Current rating is 500mA at 25°C and 330mA at a temperature of 85°C.

The working principle of the VS-ST330C14C0 is relatively simple. When the gate is connected to a negative voltage, it causes a small current flow between the Anodes, which causes the device to “turn on” and begin conducting current. The amount of current that flows through the Anodes is proportional to the amount of voltage applied to the gate. When the gate voltage is removed, the device will “turn off” and stop conducting current.

The VS-ST330C14C0 is ideally suited for use in motor control, AC power conversion, DC power conversion, inrush current limiting, and other applications where current switching and/or control are required. For example, it is commonly used as a motor speed controller in AC motor applications, as a current limiter in DC power conversion applications, and as an inrush current limiter in LED lighting applications. In addition, it can be used as a generic voltage and/or current switch in a variety of other applications.

Overall, the VS-ST330C14C0 is an excellent choice for applications where current switching and/or control are required, such as motor control, AC power conversion, DC power conversion, LED lighting, and inrush current limiting. It has a high current capacity and low forward voltage drop, making it an ideal solution for many applications. With its wide range of applications, high current capacity, and low forward voltage drop, the VS-ST330C14C0 is an excellent choice for many current switching and control applications.

The specific data is subject to PDF, and the above content is for reference