Allicdata Part #: | VS-ST330S14P0-ND |
Manufacturer Part#: |
VS-ST330S14P0 |
Price: | $ 140.38 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | SCR PHASE CONT 1400V 330A TO118C |
More Detail: | SCR 1.4kV 520A Standard Recovery Chassis, Stud Mou... |
DataSheet: | VS-ST330S14P0 Datasheet/PDF |
Quantity: | 1000 |
6 +: | $ 127.61300 |
Current - Hold (Ih) (Max): | 600mA |
Base Part Number: | ST330S |
Supplier Device Package: | TO-209AE (TO-118) |
Package / Case: | TO-209AE, TO-118-4, Stud |
Mounting Type: | Chassis, Stud Mount |
Operating Temperature: | -40°C ~ 125°C |
SCR Type: | Standard Recovery |
Current - Non Rep. Surge 50, 60Hz (Itsm): | 9000A, 9420A |
Current - Off State (Max): | 50mA |
Series: | -- |
Current - On State (It (RMS)) (Max): | 520A |
Current - On State (It (AV)) (Max): | 330A |
Voltage - On State (Vtm) (Max): | 1.52V |
Current - Gate Trigger (Igt) (Max): | 200mA |
Voltage - Gate Trigger (Vgt) (Max): | 3V |
Voltage - Off State: | 1.4kV |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
The VS-ST330S14P0 is a type of thyristors, or silicon-controlled rectifiers (SCRs), which are devices that can be used to control electrical power. They can be used in a wide range of applications from motor speed control to cost-effective temperature regulation. They are especially well suited for controlling the flow of electricity in motor drives, where their fast switching capabilities and rugged construction makes them ideal for providing reliable control.
Application Fields
The VS-ST330S14P0 can be used in a wide variety of applications, including motor drives, power conditioning, voltage regulation, temperature control, switching, UPS, battery charging, and power electronics. It is particularly suitable for heavy duty applications such as AC-DC and DC-DC converters, inverters, SCR battery chargers, and SCR power supplies. It is also very effective for controlling the speed and/ or torque of induction or synchronous motors by providing phase control or firing angle control.
Due to its reliability and rugged construction, the VS-ST330S14P0 can also be used in medical equipment and other critical systems where failure could be catastrophic. It is also suitable for heavy duty applications such as welding, traction, and transportation equipment. In short, this device is the ideal solution for controlling power in almost any high-power situation, from motor drives to battery charging.
Working Principle
When a voltage is applied to the anode and cathode of a thyristor, a small current will flow through the device in the forward direction. If the voltage is sufficiently high, it can cause the thyristor to latch into a conductive state. This is known as the forward blocking mode of operation. The thyristor can then remain in this state until the voltage is removed from the device, or it is forced into the reverse blocking mode, which is also known as triggering.
The triggering of a thyristor can be done either directly or through a gate signal. In the latter case, the voltage applied to the gate can cause the thyristor to switch from the forward blocking mode to the reverse blocking mode. In this mode, the thyristor will begin to conduct current in the reverse direction until the gate voltage is removed, at which point it will again return to the forward blocking mode and the device will cease to conduct.
The VS-ST330S14P0 offers a number of advantages as a thyristor, including fast switching, low noise, high surge capability, rugged construction, and a wide operating temperature range. These characteristics make it an ideal solution for a variety of high-power applications.
Conclusion
The VS-ST330S14P0 is a high-power thyristor that offers a wide range of applications, from motor speed control to cost-effective temperature regulation. Its fast switching capabilities and rugged construction make it ideal for providing reliable control in motor drives, power conditioning, voltage regulation, temperature control, switching, UPS, battery charging, and power electronics. The device is reliable and rugged, making it suitable for a wide variety of applications, from medical equipment to heavy-duty applications such as welding, traction, and transportation.
The specific data is subject to PDF, and the above content is for reference
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...