VS-UFB200CB40P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VS-UFB200CB40P is a rectifier diode array meant for applications in power systems. A power rectifier is a device that converts alternating current (AC) to direct current (DC). This is referred to as rectification. Rectification is used in many electrical and electronic applications. Power conversion, such as the conversion of AC to DC is one of the most common.

The VS-UFB200CB40P diode array contains two UF4001 (400V, 1A) rectifier diodes connected in antiparallel. This arrangement creates a reverse bias voltage across the diodes, allowing them to be used as a controlled current limiter in applications that require high voltages. The diode array is designed to be used in applications up to a maximum voltage of 400 volts, with a peak current rating of 1 ampere.

The diode array can be used to convert AC voltage to DC voltage. When the AC voltage from an AC source is applied to the diode array, the anode of the diode array is held high, and the cathode is held low. This allows current to flow from the anode to the cathode as the circuit’s forward voltage increases. As the voltage decreases, the cathode will begin to reverse bias and the current will not be able to flow through the circuit. This allows for the conversion of AC to DC.

The diode array can also be used to provide over-voltage protection. When the voltage applied to the diode array exceeds the maximum rating, the current through the diodes will be limited and the voltage across the diode will be clamped to the voltage rating of the diodes. This will protect the circuit from being overloaded and potentially damaged.

The VS-UFB200CB40P diode array is suitable for use in many high-power systems. It can be used in power converters, voltage converters, high-voltage switching applications, and photovoltaic systems. The diode array is also ideal for applications where high-power and high-current ratings are needed.

The VS-UFB200CB40P diode array is a versatile and robust device that can be used in a variety of applications. It has a low forward voltage drop and can handle high voltages and currents. The diode array can be used to convert AC to DC and to provide over-voltage protection for circuits and systems.

The specific data is subject to PDF, and the above content is for reference