VS40-2071 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are integral components in wireless communication and automation equipment. In particular, VS40-2071 is a 1.6/5.6 coaxial connector that operates with 1.85mm-5.6mm connector styles, and is a solution that provides a reliable signal connection with minimal power loss between two networks. It is typically used in radio frequency applications, such as cellular phone antenna connections and as a signal link between radio equipment.

VS40-2071 coaxial connectors provide a connection between a cable and a device such as an RF switch, a radio, or a Wi-Fi router. This type of connector is preferred due to its low signal loss characteristics. It is further characterized by its ability to transmit high frequencies without any distortion or degradation. It can handle frequencies up to 4 GHz with a data transfer rate of up to 80 Mbps.

The coaxial construction of the VS40-2071 connector assembly allows high-frequency signals to be routed through a single connection. It consists of three layers: an inner conductor, a dielectric material that acts as an insulator, and an outer conductor that serves as the shield. The outer conductor is usually made of brass or tin-plated copper, and it should be designed in such a manner that it can serve its shielding functions effectively. The center conductor can be made of brass, copper, aluminum, or stainless steel.

The inner and outer conductive layers are joined together by a special type of joint, called the crimp joint. The connection between the two is made through a crimping tool, which compresses the metal layers together to form a secure and reliable connection. The crimp joint is designed to provide maximum signal transfer while keeping the overall resistance low. The crimp tool is also used to ensure that the crimp joint is not damaged during installation.

The inner conductor of the connector is fitted with an insulator that is designed to protect the connection from distortion caused by nearby electromagnetic fields. The insulator is usually made of PTFE or polyethylene and is also used to ensure the maximum data transfer. The outer conductor is also designed with a shield that provides further protection from electromagnetic interference and also helps to reduce external noise.

When the connector is inserted into a device, the center and outer conductors of the connector make contact with the corresponding pins in the device. These pins are called the center and chassis pins, respectively. The center pin is used to carry the signal, whereas the outer pin is used to ground the system and ensure that the signal is not disturbed by any external source. The center pin is also connected to the ground through an inductor, which is typically a few millimeters in thickness.

The VS40-2071 coaxial connector is an effective device for connecting two networks together and providing reliable RF signal connections with minimal power losses. Its sturdy construction helps to ensure the mandatory shielding requirements in any RF environment. Its wide range of applications makes it a necessity for any automated system, which requires reliable and secure data transfer without any distortion or interference.

The specific data is subject to PDF, and the above content is for reference