VTM48ET020T080A00

Current - Output (Max):	80A
Base Part Number:	VTM48ET020
Size / Dimension:	1.28" L x 0.87" W x 0.26" H (32.5mm x 22.0mm x 6.7mm)
Package / Case:	Module
Mounting Type:	Through Hole
Efficiency:	92.4%
Operating Temperature:	-40°C ~ 125°C
Features:	Remote On/Off
Applications:	ITE (Commercial)
Voltage - Isolation:	2.25kV
Power (Watts):	160W
Series:	VI Chip® VTM®
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	2V
Voltage - Input (Max):	55V
Voltage - Input (Min):	26V
Number of Outputs:	1
Type:	Voltage Transformation Module
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC ConvertersDC to DC converters are devices used to transfer electrical power from one DC voltage to another - typically from a higher voltage to a lower one. The VTM48ET020T080A00 is a type of converter specifically designed to step down the input voltage of 48 V to an output of 12V. Its design also features built-in over voltage and over current protection.The VTM48ET020T080A00 is designed to convert the input DC voltage of 48 V to an output DC voltage of 12 V, with an efficiency of up to 88%. It is suitable for the most basic applications such as low power industrial control systems, LED lighting, CCTV cameras, and other related electronics.The VTM48ET020T080A00 DC to DC converter works on the principle of electrical power conversion. This type of converter is based on the ‘buck’ configuration, where the input voltage is converted to a lower output voltage with a step-down voltage converter. In the buck configuration, the input voltage is continuously stepped down until it matches the output level required. The ‘switching’ mechanism employed by the converter allows for greater levels of efficiency.The converter has built-in over voltage and over current protection devices. The over voltage protection is designed to prevent the converter from outputting a voltage that exceeds the level specified on the device. The over current protection is designed to protect the device and the load from any abrupt rise in current. Both of these features help to ensure the safety and reliability of the power supplied to the device.The converter also features an electrical isolation layer between the input and output. This layer acts as an insulator between the two circuits, allowing the voltage to be transferred without the danger of electric shock. The electrical isolation also helps to protect against short-circuiting, which can cause major damage to the device and its components.The VTM48ET020T080A00 DC to DC converter is designed for convenience, safety, and reliability. Its efficient design and features make it perfect for a wide range of basic applications. With its built-in over voltage and over current protection, it is sure to provide reliable and safe power conversion for your needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description