VUB116-16NO1

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Three Phase (Braking)
Technology:	Standard
Voltage - Peak Reverse (Max):	1.6kV
Current - Average Rectified (Io):	116A
Voltage - Forward (Vf) (Max) @ If:	2.76V @ 30A
Current - Reverse Leakage @ Vr:	100µA @ 1600V
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Chassis Mount
Package / Case:	E2
Supplier Device Package:	E2
Base Part Number:	VUB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.Introduction:
The VUB116-16NO1 is a bridge rectifier which is a type of diode. It is used to convert AC current to DC current. This device is commonly used in power supply designs, such as providing DC power to a load from an AC source. This application field and working principle of the VUB116-16NO1 will be discussed in more detail in this article.

Application Field of VUB116-16NO1
The VUB116-16NO1 is most commonly used in the application field of power supply design. In a power supply design, the VUB116-16NO1 is used to convert AC current to DC current. This is accomplished by the use of four diodes. The diodes are connected in a configuration called a full-wave bridge rectifier. The diodes are connected as shown in the diagram below:



As seen in the diagram, the four diodes are connected in such a way that it creates two "arms" or "legs". When AC current is applied across those two arms, the diodes will will act as switches to allow only one arm to be conducting at any one time. This creates a pulsed DC current, which can then be filtered to create a smooth DC current.
The VUB116-16NO1 can also be used in other application fields as well. For example, it can be used in frequency modulation (FM) signal modulation. In this case, the VUB116-16NO1 is used to convert the FM signal from its AC form to a DC signal. This makes the signal more stable and easier to process.

Working Principle of VUB116-16NO1
The working principle of the VUB116-16NO1 is based on the behavior of the four diodes which are connected in a bridge configuration. When an AC current is applied across the two arms of the bridge, the diodes will act as switches and will only allow current to flow through one of the arms at any one time. This results in a pulsed DC current.The VUB116-16NO1 uses the four diodes in a full-wave bridge configuration. In a full-wave bridge rectifier, two of the diodes will conduct on the positive half cycle of the AC waveform, and two of the diodes will conduct on the negative half cycle of the waveform. This type of bridge configuration is more efficient than a single-phase bridge configuration because it utilizes both the positive and negative cycles of the waveform.The VUB116-16NO1 also has an integrated voltage regulator. The voltage regulator is used to ensure that the output voltage is maintained at a regulated level, regardless of the input voltage variations. This makes the VUB116-16NO1 well-suited for use in power supply designs.

Conclusion
The VUB116-16NO1 is a bridge rectifier which is a type of diode. It is used to convert AC current to DC current, and is commonly used for power supply designs. The VUB116-16NO1 uses a full-wave bridge rectifier configuration with four diodes in order to achieve efficient conversion of AC to DC power. The voltage regulator onboard the VUB116-16NO1 also helps to ensure that the output voltage is regulated and stable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description