VUO36-12NO8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VUO36-12NO8 device is a type of diode bridge rectifier. These devices consist of four diodes which are connected in a bridge configuration to convert an alternating current (AC) voltage to a direct current (DC) voltage. The four diodes are arranged to form a bridge as shown below:

Each of the four diodes will have a different level of forward-bias which will dictate their relative voltage drop when conducting. The bridge rectifier creates a higher voltage than the AC voltage supplied to it by increasing the voltage peaks of the AC waveform. This is referred to as ‘peak-to-peak voltage amplification’ and its value can range from 1.5 times the AC voltage to nearly double the AC voltage.

The VUO36-12NO8 diodes have a high forward voltage drop and a low forward recovery time. This makes them suitable for use in high power applications where high-currents are involved. The bridge rectifier can be used for a variety of applications, including power supplies, motor control systems, and more.

The electrical properties of VUO36-12NO8 bridge rectifiers can be summarized as follows:

• Forward voltage drop: 2.0-2.2 V
• Forward recovery time: 30 ns
• Peak-to-peak voltage amplification: 1.5x to 2x
• Breakdown voltage: 600 V

The main advantage of using a bridge rectifier instead of two separate single diodes is that it can provide a higher level of current control. The bridge rectifier will be able to combine two or more paths for current to flow, thus controlling the current flow more efficiently than a single diode can.

The VUO36-12NO8 bridge rectifier is also a great choice when it comes to noise suppression. The device is able to reduce noise in the signal’s path by providing a direct path for current flow while dropping the signal’s peaks. This can help reduce current spikes and interference.

These devices are also capable of providing protection against electrical surges and can help in voltage regulation. Bridge rectifiers are a great choice for applications that require high levels of current control and protection against electrical surges.

In conclusion, the VUO36-12NO8 bridge rectifier is a great choice for applications that require high levels of current control and protection against electrical surges. The device has a high forward voltage drop and a low forward recovery time, making it suitable for use in high power applications. It is also capable of providing peak-to-peak voltage amplification and noise suppression, making it ideal for applications such as power supplies and motor control systems.

The specific data is subject to PDF, and the above content is for reference