VWO40-14IO7 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid-state switches made from a combination of other semiconductor materials such as silicon and germanium. These devices are designed to provide reliable switching of AC and DC loads without arcing or sparking, which can occur with electromechanical switches. Thyristors can be used in a variety of applications to control the power flow in a system.

The Silicon Controlled Rectifier (SCR) is a type of thyristor that can be used for most power control applications. It is a three-terminal device with an anode and a cathode, along with a control gate. It has a relatively high current density compared to other types of thyristors and can operate in either the forward or reverse blocking state. The SCR can be triggered with either a positive or a negative voltage applied to the gate terminal.

The VWO40-14IO7 is an SCR module that is used for switching AC and DC loads. It is a dual in-line package (DIP) with six pins, and is designed to switch electrical loads in full-wave or half-wave rectifier systems. The module is rated for up to 470 volts and 7 amps, and is designed to have a minimum lifetime of 100,000 switching cycles.

The working principle of the VWO40-14IO7 is fairly straightforward. When the gate voltage exceeds the breakdown voltage, the rectifier is turned on, allowing current to flow through the SCR and the load. The control voltage can be applied either continuously or as an impulsive signal, depending on the desired load switching speed. When the gate voltage falls below the breakdown voltage, the rectifier shuts off and the current is no longer allowed to flow.

The VWO40-14IO7 is used in a wide variety of applications, such as motors, power supplies, welders, and HVAC systems. It is commonly used in AC and DC motor control, as it can rapidly switch high currents with a minimum of power loss and spark. It is also used in switching circuits for high-voltage and high-current loads, as it can provide reliable protection from overvoltage and overcurrent.

In summary, the VWO40-14IO7 is an SCR module that is used to switch AC and DC loads. It is rated up to 470 volts and 7 amps, and is designed to have a minimum lifetime of 100,000 switching cycles. The module works by controlling the flow of current through the SCR, and is used in a variety of applications, such as motor and power supply control, welding, and HVAC systems. With its reliable switching capabilities, the VWO40-14IO7 is an ideal choice for any application where precise power control is required.

The specific data is subject to PDF, and the above content is for reference