| Allicdata Part #: | VX-01-1A2-ND |
| Manufacturer Part#: |
VX-01-1A2 |
| Price: | $ 3.90 |
| Product Category: | Switches |
| Manufacturer: | Omron Electronics Inc-EMC Div |
| Short Description: | SWITCH SNAP ACT SPDT 100MA 125V |
| More Detail: | N/A |
| DataSheet: |  VX-01-1A2 Datasheet/PDF |
| Quantity: | 5 |
| 1 +: | $ 3.54690 |
| Ingress Protection: | IP40 |
| Mechanical Life: | 10,000,000 Cycles |
| Electrical Life: | 1,000,000 Cycles |
| Operating Position: | 0.579" (14.7mm) |
| Operating Temperature: | -25°C ~ 80°C |
| Overtravel: | 0.040" (1.0mm) |
| Differential Travel: | 0.012" (0.3mm) |
| Pretravel: | 0.047" (1.2mm) |
| Release Force: | 3.059gf |
| Operating Force: | 25gf |
| Features: | -- |
| Series: | VX |
| Termination Style: | Solder, Quick Connect - 0.187" (4.7mm) |
| Mounting Type: | Chassis Mount |
| Actuator Type: | Round (Pin Plunger) |
| Voltage Rating - DC: | 30V |
| Voltage Rating - AC: | 125V |
| Current Rating: | 100mA (AC/DC) |
| Switch Function: | On-Mom |
| Circuit: | SPDT |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap Action, Limit Switches
The VX-01-1A2 is a specific type of snap action, limit switch. These switches are primarily used within control cabinets or enclosed switching units, and are categorized by their activation force and movement. Common applications where these switches are often seen are in vacuums cleaners, conveying systems, and certain industrial applications.
A snap action, limit switch will open and close a circuit as a result of physical force or movement. This type of switch uses a lever which actuates a set of internal contacts, in order to open or close a target circuit. As the lever is depressed, a snap-action mechanism often made from copper, steel, or bronze snaps into position, which either makes or breaks the circuit. This snap-action makes the switch much more precise than a standard toggle switch, since a set amount of force is required to activate the switch.
The VX-01-1A2 specifically has a total of 6 switch contacts. It features an adjustable contact system that allows the user to tailor the switch’s behavior to individual requirements. The switch also boasts an incredibly fast snap-action and reliable performance. This snap action is combined with two ultra-sturdy levers, for increased precision and prolonged service life. Quite often, the VX-01-1A2 is used as a safety key unit, in order to protect against incorrect operation.
Wiring the VX-01-1A2 is much like wiring any other snap-action limit switch. The leads or contacts of the switch should be wired using appropriate wires with the appropriate connections. The specific polarity of the wiring should be verified prior to use, as incorrect polarity may damage the switch. The switch should always be connected with the black wire of the supply voltage to ground, in order to maintain proper operation.
In conclusion, the VX-01-1A2 is a reliable, soft-action limit switch, used for a variety of electrical applications. It features an adjustable contact system, and an incredibly fast snap-action response. Wiring the switch is much like wiring any other snap-action limit switch. It should always be wired with the black wire of the supply voltage to ground, in order to maintain proper operation.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V