W04G-E4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are versatile components used in a variety of electrical and electronic circuits. Bridge rectifiers are a particular type of diodes used to convert alternating current (AC) to direct current (DC). The W04G-E4/51 is a popular bridge rectifier commonly used in power applications. This article will discuss the applications and explain the working principle of the W04G-E4/51.

The W04G-E4/51 is a high-performance bridge rectifier with an operating voltage of 1000 volts and a rectifying capacity of 121 A. It is a fast, four-terminal, single-phase device with a low pressure drop and a high surge current rating. As such, it is suitable for a wide range of power-related applications, including AC/DC voltage conversion, power supply rectification, electronic converters, and industrial motor control.

In these electrical applications, the W04G-E4/51 bridge rectifier acts as a controlled switch. When an AC input voltage is introduced to the terminals, the device switches from an open to a closed circuit. This allows the current to flow from one diode to the other. The result is a changing DC output voltage.

The W04G-E4/51 bridge rectifier works by allowing a continuous flow of current. Since diodes can only conduct current in one direction, the bridge rectifier is designed with two sets of four diodes, arranged in pairs called arms. The arms are connected to form a bridge pattern, with one positive terminal and one negative terminal at each end. When the input voltage is introduced, the diodes begin to conduct in turns and the output voltage changes from positive to negative in rapid succession.

In the half-wave mode of operation, the bridge rectifier converts AC to DC using only the positive half of the input voltage waveform. This is done by connecting the positive half of the waveform to the positive terminals and the negative half to the negative terminals. When the voltage peaks, the diodes are forward biased, allowing current to flow from the positive arm across to the negative arm. This way, the diode rectifies the AC input voltage to a steady DC output.

In the full-wave mode of operation, the bridge rectifier provides twice the output of a half-wave bridge rectifier. This is done by connecting both the positive and negative half of the waveform to the positive and negative terminals, respectively. The result is a DC output that is twice the peak value of the input voltage.

The W04G-E4/51 bridge rectifier is a versatile diode with a wide range of applications. It is an efficient and reliable device, capable of providing a steady DC output from an AC input voltage. It is commonly used in power applications, including AC/DC voltage conversion, power supply rectification, electronic converters, and industrial motor control. It works by switching from an open to a closed circuit when an AC input voltage is introduced, allowing current to flow from one diode to the other. Depending on the mode of operation, the bridge rectifier can convert AC to DC either in a half-wave or full-wave fashion.

The specific data is subject to PDF, and the above content is for reference