Allicdata Part #: | W3032-ND |
Manufacturer Part#: |
W3032 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | PulseLarsen Antennas |
Short Description: | ANTENNA RX DIVERSITY CER 900MHZ |
More Detail: | 900MHz GSM Chip RF Antenna 925MHz ~ 960MHz 2dBi So... |
DataSheet: | W3032 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Frequency Group: | UHF (300 MHz ~ 1 GHz) |
Frequency (Center/Band): | 900MHz |
Frequency Range: | 925MHz ~ 960MHz |
Antenna Type: | Chip |
Number of Bands: | 1 |
VSWR: | -- |
Return Loss: | -5dB |
Gain: | 2dBi |
Features: | -- |
Termination: | Solder |
Ingress Protection: | -- |
Mounting Type: | Surface Mount |
Height (Max): | 0.157" (4.00mm) |
Applications: | GSM |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF antennas are a type of antenna that convert an electrical signal into radio waves and transmit, or receive, them. W3032 antennas are a type of RF antenna designed for use at frequencies from 2.4 to 2.5 GHz. The W3032 antenna, which consists of two antennas connected to the same circuit board, is a directional antenna that provides a fixed gain up to 5GHz.
The W3032 antenna is composed of two half-wavelength loop antennas connected to a single circuit board. Each loop antenna is a U-shaped conductor that is approximately one half of a wavelength in length. The U-shaped conductors are connected to the circuit board via two pairs of metal rivets, while the center of the U-shaped conductor is connected to an RF input port on the circuit board. The input port is connected to the antenna\'s radio frequency signal source, such as a transmitter, amplifier, or some other kind of RF signal generator.
The W3032 antenna works by converting the RF input signal to an electrical signal, which is then amplified by the loop antennas. As the RF signal passes through the loop antennas, they convert the electrical energy into a magnetic field which is then radiated by the U-shaped conductors. The direction of the magnetic field determines the direction of the RF signal that is transmitted, or received, by the antenna.
The W3032 antenna is a high gain antenna that is designed to increase the range of transmissions and receptions. It is often used in point-to-point communication systems, such as two-way radios, as well as other applications requiring communication between two points. The W3032 antenna is also used in wireless networks, such as Wi-Fi systems.
The W3032 antenna is also used in automotive applications, such as navigation systems, keyless entry systems, and remote start systems. It is also used in other applications, such as surveillance and medical imaging systems. In addition, the W3032 antenna is used in military applications, as well as in many applications requiring a high-gain antenna for a range extension. The W3032 antenna can also be used for wireless local area network (WLAN) applications, as it provides a good signal to noise ratio and is very reliable.
The W3032 antenna is easy to install and maintain. It is lightweight and robust, making it very durable and lasting for many years. It is also resistant to wind, heat, and other environmental conditions.
In conclusion, the W3032 is a versatile and reliable antenna that is used in a variety of applications. It is a directional antenna with a high gain and is used in point-to-point communications, automotive applications, military and medical applications, as well as wireless local area networks. It is easy to install and maintain and is made to last for many years.
The specific data is subject to PDF, and the above content is for reference
ANTENNARF Antenna
ANTENNA SATELLITE 1620MHZRF Antenna
ANT SQUINT WIDE BAND RP SMA5.5GHz Panel...
RADOME OMNI 6DBI 2.4MHZ FEMALE2.4GHz Wh...
ANTENNA 2.4GHZ SMA2.4GHz WLAN Dome RF An...
ANTENNA 2.4GHZ DIPOLE 2DBI 10PC2.4GHz Wi...