Allicdata Part #: | W3330-K-ND |
Manufacturer Part#: |
W3330-K |
Price: | $ 33.26 |
Product Category: | RF/IF and RFID |
Manufacturer: | PulseLarsen Antennas |
Short Description: | EVAL BOARD FOR W3330 |
More Detail: | N/A |
DataSheet: | W3330-K Datasheet/PDF |
Quantity: | 1000 |
17 +: | $ 30.24000 |
Series: | -- |
Part Status: | Active |
Type: | Antenna |
Frequency: | 868MHz, 915MHz, 2.4GHz |
For Use With/Related Products: | W3330 |
Supplied Contents: | Board(s) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Evaluation and Development Kits, Boards have gained quite a bit fame due to their ever-growing demand in the consumer electronics market. W3330-K is one such product. The W3330-K is a low cost, low power data acquisition and signal conditioning tool used for RF measurements. It is mainly used for transmissions over shorter distances (up to 100 meters). The W3330-K can be used in a variety of applications such as RF Transmitter, Receiver, Signal Generator, Test Instrument, Antenna Evaluation System, Load Network Measurement, and many more.
For its working principle, W3330-K works in two modes – linear response and sign. In linear response mode of operation, the linear response of the W3330-K is gained from the input signal at any frequency. The linear response will directly give the gain and attenuation at any point. The linear response is a function of the amplitude of the input signal and the gain and attenuation of the W3330-K. In sign mode, the W3330-K provides the sign of the input signal. The sign of the input signal is a function of the amplitude of the input signal and the gain and attenuation of the W3330-K. With the help of the sign mode, the linear response of the W3330-K can be adjusted to gain a desired linearity over a specific range.
The application of W3330-K can be seen in radio frequency evaluation. It can be used as an effective tool for doing latency, gain, bandwidth, and distortion measurements in RF systems. In radiofrequency measurements, the W3330-K can be used to measure small signals. As mentioned earlier, the W3330-K can be used in a variety of applications such as RF transmitter, receiver, signal generator, test instrument, load network measurement, etc.
The W3330-Kcan be used to measure the spectral purity of signal. This is especially useful in the evaluation of digital signals. It can be used to measure the noise generated by digital circuits in order to see the effects of interference. It can also be used to measure the signal-to-noise ratio of a signal. It can also be used to measure the phase stability and frequency accuracy of a signal. It can be used to determine the phase noise of a signal. It can also be used to measure harmonic content of a signal.
W3330-K can be used in the automotive industry. It can be used to measure the emissions of automobiles and other vehicles. This is because the W3330-K can measure the amplitude of the emissions and the frequency of the emissions. This can be used to measure the noise generated by a vehicle, which can be used to ensure emissions compliance.
W3330-K can be used in spectral analysis. It can be used to measure the characteristics of a signal in the frequency domain. This includes measuring the magnitude of the signal at certain frequencies and the quality factor of the signal. This can be used to measure the delay of a signal. It can also be used to measure the power spectrum of a signal.
W3330-K can be used in other testing applications. It can be used to create signal processing applications. For example, it can be used to analyze signals for communication signals, acoustic signals, medical signals, etc. It can also be used to test the performance of communication systems. It can be used to perform digital signal processing.
In conclusion, W3330-K is an extremely versatile product which is suitable for a wide array of applications. It can be used for RF measurements, radio frequency evaluation, emissions test, automotive industry testing, spectral analysis, and many other applications. It is very easy to use and is affordable. It is also extremely reliable, which makes it an ideal choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
W3334B0150 | PulseLarsen ... | 1.61 $ | 1335 | ANTENNA FPC DSRC U.FL CON... |
W3331 | PulseLarsen ... | 1.92 $ | 938 | RF ANT TRACE 895MHZ 2.4GH... |
W3333 | PulseLarsen ... | 1.92 $ | 455 | RF ANT TRACE 895MHZ 2.4GH... |
W3332B0150 | PulseLarsen ... | 2.89 $ | 929 | RF ANT TRACE 895MHZ 2.4GH... |
W3330-K | PulseLarsen ... | 33.26 $ | 1000 | EVAL BOARD FOR W3330 |
W3330 | PulseLarsen ... | 0.9 $ | 1000 | RF ANT TRACE 868MHZ 2.4GH... |
JN5179 USB DONGLE FOR ZIGBEE
EVAL BOARD FOR SKY67159-396LF
EVAL BOARD FOR MICRF219A
EVAL BOARD FOR HMC468ALP3
EVAL BOARD NESG250134
BOARD EVAL HMC541LP3E