| Allicdata Part #: | WHA2R0FET-ND |
| Manufacturer Part#: |
WHA2R0FET |
| Price: | $ 0.25 |
| Product Category: | Resistors |
| Manufacturer: | Ohmite |
| Short Description: | RES 2 OHM 1/2W 1% AXIAL |
| More Detail: | 2 Ohms ±1% 0.5W, 1/2W Through Hole Resistor Axial ... |
| DataSheet: |  WHA2R0FET Datasheet/PDF |
| Quantity: | 1000 |
| 1000 +: | $ 0.22145 |
| Series: | WH |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 2 Ohms |
| Tolerance: | ±1% |
| Power (Watts): | 0.5W, 1/2W |
| Composition: | Wirewound |
| Features: | -- |
| Temperature Coefficient: | ±50ppm/°C |
| Operating Temperature: | -55°C ~ 150°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.100" Dia x 0.200" L (2.54mm x 5.08mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are widely used in electrical and electronics applications. The most common type of through hole resistor is the WHA2R0FET, which is a thin film resistor.
WHA2R0FET resistors are made up of a thin metal film deposited onto a ceramic substrate. The resistor is encased in a housing, often made of a glass or ceramic material, which serves to protect the resistor from environmental contamination. The size of the resistor varies, but the typical size of a through hole resistor is less than 1/16th of an inch.
The primary application areas for a WHA2R0FET resistor are control circuits, voltage control, temperature control, current regulation, and signal transduction. The resistor acts as an electrical resistance in these applications, and it is capable of directly controlling electric energy flow in a circuit. The resistor can also be used for power control and power factor correction.
The working principle of the WHA2R0FET resistor is derived from Ohm\'s law, which states that the current through a circuit is proportional to the voltage across the circuit. Therefore, the resistance offered by the resistor is inversely proportional to the current flowing through the resistor; as the current increases, the resistance decreases. This allows the resistor to be used to regulate electrical power in a circuit.
The WHA2R0FET resistor is a reliable and accurate way of controlling the electrical power in a circuit. The resistor offers a wide range of resistance values, which allows for precise control of the application. The resistor is also highly durable and resistant to environmental contamination, making it suitable for use in harsh environments.
In conclusion, the WHA2R0FET resistor is a reliable and accurate way of controlling electric current and power flow in a circuit. It is a widely used resistor in a variety of electrical and electronic applications, and it is highly durable and resistant to environmental contamination.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| WHA25RFE | Ohmite | 0.55 $ | 1000 | RES 25 OHM 1/2W 1% AXIAL2... |
| WHA2R0FE | Ohmite | 0.55 $ | 1000 | RES 2 OHM 1/2W 1% AXIAL2 ... |
| WHA200FE | Ohmite | 0.63 $ | 1000 | RES 200 OHM 1/2W 1% AXIAL... |
| WHA250FE | Ohmite | 0.63 $ | 1000 | RES 250 OHM 1/2W 1% AXIAL... |
| WHA25RFET | Ohmite | 0.25 $ | 1000 | RES 25 OHM 1/2W 1% AXIAL2... |
| WHA2R0FET | Ohmite | 0.25 $ | 1000 | RES 2 OHM 1/2W 1% AXIAL2 ... |
| WHA200FET | Ohmite | 0.29 $ | 1000 | RES 200 OHM 1/2W 1% AXIAL... |
| WHA250FET | Ohmite | 0.29 $ | 1000 | RES 250 OHM 1/2W 1% AXIAL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...