Allicdata Part #: | WHC2R0FET-ND |
Manufacturer Part#: |
WHC2R0FET |
Price: | $ 0.25 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 2 OHM 2W 1% AXIAL |
More Detail: | 2 Ohms ±1% 2W Through Hole Resistor Axial Wirewou... |
DataSheet: | WHC2R0FET Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.22145 |
Series: | WH |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 2 Ohms |
Tolerance: | ±1% |
Power (Watts): | 2W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.180" Dia x 0.449" L (4.57mm x 11.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are a type of electrical component that have gained wide application within the electrical and electronics industries. These resistors come in two basic varieties: wire wound through hole resistors and film resistors.
Wire wound through hole resistors are designed using a filament of high-conductive metal wire which is wound around a support core or fill material. This material can be made of a variety of materials such as carbon, glass, epoxy, or ceramic. The diameter of the wire used in these resistors determines the amount of resistance present, which is measured in Ohms. These resistors are typically used in applications requiring high power handling and low noise.
Film through hole resistors are designed by winding carbon-impregnated film around a support core and film of insulation. This insulation prevents the current from traveling in the wrong direction and helps to minimize noise. These resistors are typically used in applications requiring very precise resistance values, such as in medical equipment or scientific instruments.
WHC2R0FET through hole resistors are one of the more popular types of resistors. They are designed for use in applications requiring high switching frequencies and low power consumption. This type of resistor features a ceramic-based material which is integrated onto a ceramic substrate using a dielectric material. This allows for a low temperature coefficient of resistance, low power consumption, and high insulation resistance. In addition, the high temperature performance and low electrical noise of these resistors make them suitable for use in applications in which temperature peaks and fluctuations occur.
When used in a circuit, the WHC2R0FET through hole resistor allows current to pass through the component but restricts the current to a certain level. This level depends on the resistance of the resistor, which can be adjusted by changing the amount of film used in the resistor\'s construction. This is done by adding more or less carbon-impregnated film, depending on the desired resistance. By adjusting the resistance, the WHC2R0FET through hole resistor can be used to control the flow of current in a circuit.
The WHC2R0FET through hole resistor is a very reliable and efficient way to regulate current in a circuit. Its efficient design helps to reduce electrical noise and maintain consistent temperature performance. In addition, its low power dissipation and high insulation resistance make it a suitable choice for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WHC200FE | Ohmite | 0.55 $ | 1000 | RES 200 OHM 2W 1% AXIAL20... |
WHC250FE | Ohmite | 0.55 $ | 1000 | RES 250 OHM 2W 1% AXIAL25... |
WHC25RFE | Ohmite | 0.55 $ | 1000 | RES 25 OHM 2W 1% AXIAL25 ... |
WHC2R0FE | Ohmite | 0.55 $ | 1000 | RES 2 OHM 2W 1% AXIAL2 Oh... |
WHC2K5FE | Ohmite | 0.63 $ | 1000 | RES 2.5K OHM 2W 1% AXIAL2... |
WHC2K5FET | Ohmite | 0.29 $ | 1000 | RES 2.5K OHM 2W 1% AXIAL2... |
WHC250FET | Ohmite | 0.25 $ | 1000 | RES 250 OHM 2W 1% AXIAL25... |
WHC25RFET | Ohmite | 0.25 $ | 1000 | RES 25 OHM 2W 1% AXIAL25 ... |
WHC2R0FET | Ohmite | 0.25 $ | 1000 | RES 2 OHM 2W 1% AXIAL2 Oh... |
WHC200FET | Ohmite | 0.25 $ | 1000 | RES 200 OHM 2W 1% AXIAL20... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...