WHC4R0FE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, also called as WHC4R0FE resistors, are a type of passive electronic components commonly used in a wide range of electronic applications.

A Through Hole Resistor is a component in which a resistive element is fabricated in one piece and is designed to be mounted through a circuit board such that the body of the component would be located on one side of the board and the pins, or terminals, of the component on the other. On the basis of their form, they are also known as through-hole mount resistors and they come in many standard sizes.

The main purpose of these resistors is to introduce limited resistance (in Ohms), in an electronic circuit, so as to control the flow of current. The electrical resistance of a resistor is usually achieved by depositing a resistive material (such as Carbon) or by winding a resistive strip or wire around a form.

WHC4R0FE resistors are typically used in applications to limit the amount of current in a circuit. They are generally employed in the design of circuits that require the use of a large number of resistors and are often used in complement with other components such as capacitors, diodes, transistors and other active components.

The working principle of a WHC4R0FE resistor is relatively simple. When the power supply is turned on, a voltage is created across the resistor due to the current flowing through it. a certain amount of heat is generated because of the resistors resistance to the current, and this in turn results in a drop in the current passing through it.

The amount of resistance is represented by the ‘Ohm’ value on the resistor and this typically varies from around 1 Ohm to 10 Meg Ohms, or more. This resistance value is directly proportional to the length and cross section of the resistive element and this can be altered to achieve different values. Typically, resistors with higher tolerance values will be more accurate, however they will also be more expensive.

WHC4R0FE resistors can be found in a wide range of applications. They are commonly used in motor controllers for latching motors, and used in a variety of different circuit applications such as amplifiers and voltage regulators. They are also used in digital logic gates such as those used in computers for switching between different logic states.

These resistors can also be used in RF applications such as attenuators and filters, which are used to control the level of the radio frequency signal which is being transmitted or received. The resistors can also be employed in applications which require audio filtering such as in musical electronic instruments.

In conclusion, WHC4R0FE resistors are versatile components that have a range of different applications in a variety of different industries. They are relatively easy to install and can be used to regulate the voltage and current in a circuit.

The specific data is subject to PDF, and the above content is for reference