WHS3-10RJA1 Resistors |
|
Allicdata Part #: | 985-1483-3-ND |
Manufacturer Part#: |
WHS3-10RJA1 |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | TT Electronics/Welwyn |
Short Description: | RES 10 OHM 3W 5% AXIAL |
More Detail: | 10 Ohms ±5% 3W Through Hole Resistor Axial Flame P... |
DataSheet: | WHS3-10RJA1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | WHS |
Packaging: | Tape & Box (TB) |
Part Status: | Discontinued at Digi-Key |
Resistance: | 10 Ohms |
Tolerance: | ±5% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | Flame Proof, Pulse Withstanding, Safety |
Temperature Coefficient: | ±200ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.205" Dia x 0.571" L (5.20mm x 14.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
Through hole resistors are an essential component of almost any electronic device, and can be found in a wide range of applications. The most common type is the WHS3-10RJA1, which is a standard cylindrical-shaped resistor with two leads that protrude from the body of the device. The lead diameter of the WHS3-10RJA1 is 0.12" (3.05mm) with a body diameter of 0.2" (5.08mm).
The WHS3-10RJA1 is primarily designed for use on Printed Circuit Boards (PCBs) and is commonly used in applications that require the reliable and accurate measurements of resistances values. These resistors are available in a variety of resistance values, ranging from zero ohms to 3 megaohms, and offer high accuracy and reliability due to their robust construction.
The working principle of the WHS3-10RJA1 is simple. Inside the resistor, metal plates are connected to one or two leads, depending on the model. The metal plates are separated by an insulating material called a dielectric, which allows electricity to travel between the plates but prevents high voltage from passing through. The resistance of the resistor is determined by the number and width of the metal plates, as well as the thickness of the dielectric between them.
The WHS3-10RJA1 is typically used in a variety of high voltage and low voltage applications, including power supplies, motor drives, and power boards. It is most commonly used in high frequency and high voltage applications due to its small size and low volt drop. In addition, it is also well suited for automotive and military applications, as it is designed for a wide range of harsh operating conditions.
The WHS3-10RJA1 is a great choice for a variety of different applications, as it is a reliable and accurate way to measure resistances values. It is also an inexpensive option for measuring current and voltage without using a large amount of energy. In addition, the small size of the WHS3-10RJA1 allows it to be placed in tight spaces or on irregularly shaped surfaces. This makes it a great choice for a variety of electronic devices, including those found in automotive, military, and consumer electronics.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WHS3-6R8JA1 | TT Electroni... | 0.0 $ | 1000 | RES 6.8 OHM 3W 5% AXIAL6.... |
WHS3-4R7JA1 | TT Electroni... | 0.0 $ | 1000 | RES 4.7 OHM 3W 5% AXIAL4.... |
WHS3-10RJA1 | TT Electroni... | 0.0 $ | 1000 | RES 10 OHM 3W 5% AXIAL10 ... |
WHS3-15RJA1 | TT Electroni... | 0.0 $ | 1000 | RES 15 OHM 3W 5% AXIAL15 ... |
WHS3-1R5JA1 | TT Electroni... | 0.0 $ | 1000 | RES 1.5 OHM 3W 5% AXIAL1.... |
WHS3-33RJA1 | TT Electroni... | 0.09 $ | 1000 | RES 33 OHM 3W 5% AXIAL33 ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...