WLBR100FE

Series:	WL
Packaging:	Bulk
Part Status:	Active
Resistance:	100 mOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Wirewound
Features:	Current Sense, Moisture Resistant
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.276" L (3.30mm x 7.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are an important type of electronic component used in a wide range of electronic circuits and components. They are also known as through-hole resistors, since they have two holes that pass through the whole resistor body. Through hole resistors are used to limit the current flow in a circuit and can be used for several other purposes in electronic circuits, such as voltage dividing, filtering, signal conditioning, and impedance matching.The WLBR100FE can be classified as a through hole resistor. It has two holes that are 6.3mm in diameter and is typically installed on a printed circuit board. This model is a surface mount resistor and is available in several resistance ratings from 0.1 ohms to 10K ohms, with tolerance ranging from +/- 1% to +/- 10%. It has a power rating of 1 watt and features a temperature coefficient of ±50ppm/°C.The WLBR100FE is designed with a low profile body and has a mechanical construction designed specifically for surface mounting applications. The component is lead-free compatible and features a Cu/Ni flame-retardant housing, making it suitable for applications in areas where flammability is a concern.The WLBR100FE is used in applications where a verysmall size and a lowprofile body are needed, such as automotive, industrial, consumer, and medical electronics. It is also used for telecom, power, and security applications.In terms of its working principle, the WLBR100FE operates by using two electrically-separate metal plates, known as the electrical plates, to form a variable resistance. These plates are located in the body of the WLBR100FE, and the resistance is determined by the distance between the two plates. When the distance between the two plates is adjusted, the resistance changes and can be adjusted from a low value to a high one.The WLBR100FE can also be used in applications where a source current needs to be limited, or when a voltage-divider is needed to adjust voltage levels. It can also be used to provide noise cancellation in sensitive circuits.Due to its compact design, the WLBR100FE has a high performance-to-cost ratio, making it a desirable choice for a variety of applications. It can offer a wide range of resistances while handling 1 watt of power, making it suitable for a variety of projects. Furthermore, the component is designed to provide superior performance and reliability, even under extreme environmental conditions, making it a suitable choice for most applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description