WLGCA2-YLE-N

Series:	*
Part Status:	Obsolete

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The WLGCA2-YLE-N snap action limit switch is a type of set-point switch used to detect and interpret the movement or change in position of a system. This switch, when triggered, is capable of controlling a low-voltage system or circuit by detecting a change in a physical parameter, such as pressure, vibration, or temperature. The WLGCA2-YLE-N snap action limit switch provides a cost-effective solution for controlling various industrial machinery, controls, and instruments.The WLGCA2-YLE-N snap action limit switch has two basic components – the fixed and the moving side of the switch. The fixed side of the switch consists of a stationary contact and an armature that slides along a track, while the moving side consists of a movable contact and an actuator. The fixed contact is connected to the high voltage system, whereas the armature is connected to the low voltage system. When the movable contact is triggered, a signal is sent to the low voltage system, and the armature moves and activates a low voltage or control circuit.The WLGCA2-YLE-N snap action limit switch works on the principle of a sealed reed switch and hinges on a flexible internal spring that could be adjusted to fit the application field. This type of switch has a set of contacts inside the housing, which open and close in response to changes in temperature, pressure, vibration, or force. When the actuator permanently deforms the internal spring and closes the switch, the set point limit is exceeded and the contact closure initiates an action in the control circuit. The WLGCA2-YLE-N snap action limit switch is normally used to sense whether a limit set point has been exceeded. These switches are often used in ducts, conveyors, pneumatic systems and motors. When the contact is closed, it can initiate a relay, and control the flow of electricity to either turn the power off, or to reset the circuit and alarm. These switches are also capable of monitoring and controlling the set points of a wide range of temperature-based processes, such as controlling heating, cooling or air conditioning systems.The WLGCA2-YLE-N snap action limit switch is also important for other non-electrical applications, such as controlling level of fluids and pressure. In these applications, the switch can be used to control when a valve opens or closes and can be used to sense the presence of a maximum or minimum levels of pressure, which can be used to prevent events like flooding, over pressurisation or over heating from occurring. The WLGCA2-YLE-N has a number of advantages over other types of limit switches. These include being small and lightweight, as well as being able to be mounted on different surfaces and in places where traditional switches would be difficult to install. Additionally, as the switch’s positioning and control are highly precise and reproducible, it is easier to maintain and has a longer life cycle than other switches.The WLGCA2-YLE-N snap action limit switch is an economical alternative for the control of electrical and non-electrical systems, and can be used to detect a variety of physical parameters. Its small size and ability to mount on different surfaces make it a great choice for controlling a wide range of equipment and processes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description