WNBR25FET Allicdata Electronics

WNBR25FET Resistors

Allicdata Part #:

WNBR25FETR-ND

Manufacturer Part#:

WNBR25FET

Price: $ 0.30
Product Category:

Resistors

Manufacturer: Ohmite
Short Description: RES 0.25 OHM 1W 1% AXIAL
More Detail: 250 mOhms ±1% 1W Through Hole Resistor Axial Non-I...
DataSheet: WNBR25FET datasheetWNBR25FET Datasheet/PDF
Quantity: 3000
1000 +: $ 0.27531
2000 +: $ 0.26910
5000 +: $ 0.26393
10000 +: $ 0.25772
Stock 3000Can Ship Immediately
$ 0.3
Specifications
Series: WN
Packaging: Tape & Reel (TR) 
Part Status: Active
Resistance: 250 mOhms
Tolerance: ±1%
Power (Watts): 1W
Composition: Wirewound
Features: Non-Inductive
Temperature Coefficient: ±90ppm/°C
Operating Temperature: -55°C ~ 150°C
Package / Case: Axial
Supplier Device Package: Axial
Size / Dimension: 0.130" Dia x 0.276" L (3.30mm x 7.00mm)
Height - Seated (Max): --
Number of Terminations: 2
Failure Rate: --
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com


Through Hole Resistors refer to those resistors that are mounted through holes drilled from the top to the bottom of a PCB. They are mostly used in high power applications, as well as in areas where more robust mounting is required. The WNBR25FET is a common type of through hole resistor that is available in a variety of applications.


The WNBR25FET is a high power, low temperature, and high reliability resistor. It has been designed as a general-purpose device for both single and multi-channel applications. The device can be used to replace existing resistors and provide additional protection to equipment and components that require a higher power rating than traditional resistors.


The WNBR25FET is designed with a two-layer construction. Its top and bottom layers are made of a metal sheet that is typically copper. The resistor is then insulated with a combination of thermally conductive materials, such as a ceramic, glass, or plastic material. This insulation prevents any sort of electrical shorting out of the resistor or damage to any of its components.


The WNBR25FET also features an internal temperature sensor and thermal protection circuits. These features help to ensure the device does not overheat or become damaged due to high temperature. This temperature compensating feature also helps to reduce the ripple levels on signal lines and helps to increase the efficiency of the device. Furthermore, the device has a high power rating that allows it to withstand high power applications without sacrificing performance or reliability.


The working principle of the WNBR25FET is relatively simple. The device consists of two layers of metal sheet with two terminals located on the top and bottom. The top and bottom layers are connected to each other via a variable resistance. When current is applied to the device, the resistance changes, and this in turn causes the voltage across the device to be altered. By altering the resistance, it is possible to adjust the current or voltage output of the device.


The WNBR25FET can be used in a variety of applications including DC/DC converters, UPS systems, electronic motor controllers, high power amplifiers, and voltage regulators. It is also well suited for use in medical and industrial equipment and other high temperature applications. The device is capable of handling up to 5 volts with a power rating of up to 25 watts. This makes it suitable for a wide range of applications.


In conclusion, the WNBR25FET is a high power, low temperature, and high reliability resistor. It has been designed as a general-purpose device for both single and multi-channel applications. It features a two-layer construction and an internal temperature sensor and thermal protection circuits, which help to ensure it does not overheat or become damaged due to high temperature. The working principle of the WNBR25FET is relatively simple and it can be used in a variety of applications including DC/DC converters, UPS systems, electronic motor controllers, high power amplifiers, and voltage regulators.


The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "WNBR" Included word is 8
Part Number Manufacturer Price Quantity Description
WNBR10FE Ohmite 0.68 $ 1000 RES 0.1 OHM 1W 1% AXIAL10...
WNBR25FE Ohmite 0.68 $ 1000 RES 0.25 OHM 1W 1% AXIAL2...
WNBR50FE Ohmite 0.68 $ 1000 RES 0.5 OHM 1W 1% AXIAL50...
WNBR75FE Ohmite 0.68 $ 1000 RES 0.75 OHM 1W 1% AXIAL7...
WNBR75FET Ohmite 0.3 $ 1000 RES 0.75 OHM 1W 1% AXIAL7...
WNBR50FET Ohmite 0.3 $ 1000 RES 0.5 OHM 1W 1% AXIAL50...
WNBR10FET Ohmite 0.3 $ 4000 RES 0.1 OHM 1W 1% AXIAL10...
WNBR25FET Ohmite 0.3 $ 3000 RES 0.25 OHM 1W 1% AXIAL2...
Latest Products
SQM700JB-68K

RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...

SQM700JB-68K Allicdata Electronics
SQM700JB-1R3

RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...

SQM700JB-1R3 Allicdata Electronics
RNC60J24R9FSB14

RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...

RNC60J24R9FSB14 Allicdata Electronics
RWR89S2R80DRS70

RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...

RWR89S2R80DRS70 Allicdata Electronics
RNC60J7503FSB14

RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...

RNC60J7503FSB14 Allicdata Electronics
RWR81S3400FSB12

RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...

RWR81S3400FSB12 Allicdata Electronics