WND2K5FET Resistors |
|
Allicdata Part #: | WND2K5FETTR-ND |
Manufacturer Part#: |
WND2K5FET |
Price: | $ 0.38 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 2.5K OHM 3W 1% AXIAL |
More Detail: | 2.5 kOhms ±1% 3W Through Hole Resistor Axial Non-I... |
DataSheet: | WND2K5FET Datasheet/PDF |
Quantity: | 500 |
500 +: | $ 0.33840 |
1000 +: | $ 0.28130 |
2500 +: | $ 0.27495 |
5000 +: | $ 0.26966 |
12500 +: | $ 0.26332 |
Series: | WN |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 2.5 kOhms |
Tolerance: | ±1% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | Non-Inductive |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.217" Dia x 0.533" L (5.50mm x 13.54mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
The WND2K5FET application field and working principle is an example of a through-hole resistor. Through-hole resistors are widely used in the electronics manufacturing industry. As a type of passive component, through-hole resistors are used in a variety of designs in a variety of ways. A through-hole resistor is a component with two or more terminals that are soldered to a printed circuit board (PCB). The resistance is determined by the size of the component, which is usually indicated by a marking stamped on the bottom.
For most types of through-hole resistors, the resistance is determined by the length and thickness of the component. The length of the resistor is usually expressed in mm, while the thickness is usually expressed in ohms/square. There are different types of through-hole resistors, including carbon-film, metal-film, and wire-wound. Each of these types have their own advantages and disadvantages, which should be taken into consideration when selecting a resistor to use in a design.
The WND2K5FET is a common type of through-hole resistor. It is a metal-film through hole resistor with a resistance rating of ±5%. This type of resistor is exceptionally stable and is used in many applications, such as power resistors, voltage divider networks, and pulse width modulation. The WND2K5FET has a wide working temperature range of -55 to +155 degrees Celsius, and has a power rating of 0.25W to 0.5W. This type of resistor is also designed to operate in both high and low humidity environments, and can withstand high vibration and shock.
The working principle of a through-hole resistor can be explained by the concept of Ohm\'s law. This states that the current through a through-hole resistor is directly proportional to the applied voltage across its terminals. In other words, the higher the voltage, the higher the current. As the applied voltage increases, the resistance of the through-hole resistor decreases, allowing more current to flow. This relationship is described mathematically as R=V/I, where R is the resistance of the resistor, V is the voltage, and I is the current.
Through-hole resistors are widely used in electronics applications and play a crucial role in the functionality and performance of a circuit. They are used to adjust the behaviour of a circuit, provide stability, and reduce risk. As such, it is important to choose the right type and value of resistor for a design.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...