WRC2AJT15R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are an important part of electrical and electronic circuits. The WRC2AJT15R0 is a through hole resistor that is designed for use in high frequency applications. It is made from a cobalt alloy and has a resistance of 1.5Ohms, with a nominal tolerance of ±10%.

The WRC2AJT15R0 is a robust and reliable through hole resistor, ideal for high frequency applications due to its self-heating capacity and wide operating temperature range. It is a type of resistor known as a current sensing resistor, which is used in high frequency switching applications. Current sensing resistors are used to measure the current through a circuit, providing a precise and accurate measurement compared to traditional resistors.

The WRC2AJT15R0 is a non-inductive resistor, meaning it does not store any energy and therefore has a very low impedance at high frequencies. The low impedance is an important factor in high frequency applications, as it allows more current to pass through the resistor when needed. The WRC2AJT15R0 also provides a low thermal resistance which helps to keep power dissipation low, enabling it to be used in higher frequency circuits. This helps to increase efficiency and to extend the life of the resistor.

The WRC2AJT15R0 is designed to have a very low inductance, meaning it can be used in circuits with high levels of electromagnetic interference (EMI). This is an important consideration for applications in medical and military applications, where EMI can cause interference with other systems. The WRC2AJT15R0 also provides a high level of reliability and a wide operating temperature range, which makes it suitable for use in many applications.

The basic working principle of the WRC2AJT15R0 is simple. It is a current sensing resistor, which is designed to measure the current passing through a circuit. The resistor has two terminals, which are connected across the circuit. When the voltage across the terminals is measured, the current is proportional to the measured voltage. The current measured is then used to determine the resistance value across the resistor.

The WRC2AJT15R0 is an ideal through hole resistor for use in high frequency applications. It provides a reliable and robust solution, with low inductance and low thermal resistance. The low impedance at high frequencies enables more current to pass through it, making it suitable for use in applications which require high levels of accuracy. The wide operating temperature range and EMI protection make it suitable for a wide range of applications, such as medical and military applications.

The specific data is subject to PDF, and the above content is for reference