Series:	W16
Part Status:	Active
Sensing Method:	Through-Beam
Sensing Distance:	0' ~ 147.60' (0 ~ 45m)
Voltage - Supply:	10 V ~ 30 V
Response Time:	500µs
Output Configuration:	Push-Pull, NPN/PNP
Connection Method:	Connector, M12
Ingress Protection:	IP66, IP67, IP69K
Cable Length:	--
Light Source:	Red (635nm)
Adjustment Type:	Adjustable
Operating Temperature:	-40°C ~ 60°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical Sensors - Photoelectric, Industrial

Optical sensors have many applications in both the industrial and scientific environment. WSE16P-24162100A00 is one of the most commonly used optical sensors in industrial and scientific applications. This article will discuss the application field and working principle of the WSE16P-24162100A00. The WSE16P-24162100A00 is a type of industrial photoelectric sensor with a built-in amplifier and output pulse control circuit that has a wide operating temperature range. It is used primarily for sensing the presence, absence, and position of objects for industrial applications. Its typical applications include, presence and absence detection, material detected position, material level detection, counting, and home/building automation systems. The WSE16P-24162100A00 works by emitting a light beam that is focused onto the object and then sensing the reflected beam with its built-in amplifier. When the light beam is reflected, the amplifier detects it and then outputs a signal that can be used to control the operation of the system. The photoelectric sensor is also capable of detecting objects that are moving at various speeds, making them ideal for use in many industrial applications.The WSE16P-24162100A00’s output signal can be divided into two types – retro-reflective and through-beam. In a retro-reflective mode, an emitter emits light onto the object and the light is reflected back onto the receiver. In a through-beam system, an emitter sends a beam of light across the sensing area and a receiver captures the signal. Depending on the application, the user can switch between the two modes using the control circuit. The WSE16P-24162100A00 has a built-in signal amplifier that amplifies the reflected signal, increasing its accuracy. The amplifier then sends the signal to the control circuit, which further processes the signal and decides if the signal should be output or ignored. The WSE16P-24162100A00 has a wide operational temperature range, making it suitable for use in a wide variety of environments. It also has a long service life due to its robust design, and is highly reliable.In conclusion, the WSE16P-24162100A00 is an industrial photoelectric sensor with a built-in amplifier and output pulse control circuit. It is used for sensing the presence, absence, and position of objects in industrial applications, and it works by emitting a light beam that is focused onto the object and then sensing the reflected beam with its built-in amplifier. The WSE16P-24162100A00 has a wide operational temperature range and a long service life, making it suitable for use in a wide variety of environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description