Allicdata Part #: | WT27L-2S830A-ND |
Manufacturer Part#: |
WT27L-2S830A |
Price: | $ 430.48 |
Product Category: | Sensors, Transducers |
Manufacturer: | SICK, Inc. |
Short Description: | WITH MINI CONN |
More Detail: | N/A |
DataSheet: | WT27L-2S830A Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 391.34300 |
Series: | W27-2 Laser |
Part Status: | Active |
Sensing Method: | Proximity |
Sensing Distance: | 3.937" ~ 31.496" (100mm ~ 800mm) |
Voltage - Supply: | 24 V ~ 240 V |
Response Time: | 50µs |
Output Configuration: | Relay - Dark-ON/Light-ON |
Connection Method: | Connector |
Ingress Protection: | IP65 |
Cable Length: | -- |
Light Source: | Red (650nm) |
Adjustment Type: | Adjustable, Potentiometer |
Operating Temperature: | -10°C ~ 45°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are widely used in the industrial, medical, and automotive fields, and are used to detect the physical presence of objects, as well as their location and relative position. The WT27L-2S830A is an example of a Photoelectric sensor that is typically used to detect the presence of tools, parts, and objects. The sensor operates on a principle of optical transmission and reflection and is based on a specific set of characteristics that are built into its components.
The main component of the WT27L-2S830A is an infrared light emitting diode, typically referred to as an LED. The LED emits a beam of infrared light that is then focused onto the target by an optical lens. The reflected infrared light is then picked up by a photodetector, which in this case is a phototransistor. The amount of light received by the detector is used to determine the presence and location of the object being sensed.
The sensor is designed to detect objects up to a certain predetermined distance, usually around 400mm, but this exact distance can vary depending on the model of the sensor. Additionally, the sensor can be configured to detect objects in either continuous or pulsed mode. In continuous mode, the LED is always emitting and the detector is constantly sensing the reflected light. In pulsed mode, the LED emits light in short bursts and the detector will only sense the light when it is present. This mode is often used to reduce power consumption and improve signal-to-noise ratio.
The WT27L-2S830A can be used in a wide range of industrial applications. Examples of these applications include automobile production lines, where they are used to detect part presence and location; pick-and-place robots, where they are used to help the robots detect the orientation and location of components; packaging machines, where they are used to detect the presence and orientation of objects; and medical imaging systems, where they are used to detect the location and orientation of organs or tissues.
By using the WT27L-2S830A in these applications, engineers and manufacturers in the industrial, automotive, and medical industries can save time and money by increasing the speed and accuracy of processes. Additionally, by choosing the right model and setting up the appropriate configuration settings, the sensor can be optimized to best suit the needs of the application.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WT27L-2S830A01 | SICK, Inc. | 430.48 $ | 1000 | W/MINI CONN WET CONTACT |
WT27L-2F430A | SICK, Inc. | 406.57 $ | 4 | SEN PHT PNP 800MM LO/DO M... |
WT27-2R830 | SICK, Inc. | 268.55 $ | 1000 | RELAY RED MINI PLUG |
WT27L-2N430 | SICK, Inc. | 406.57 $ | 1000 | SPECIAL CHECK LABEL |
WT27L-2F430A01 | SICK, Inc. | 426.26 $ | 1000 | RUGGEDIZED VERSION |
WT27L-2S830A | SICK, Inc. | 430.48 $ | 1000 | WITH MINI CONN |
WT27L-2S930A01 | SICK, Inc. | 430.48 $ | 1000 | W/MICRO CONN WET CONTACT |
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM