WUV-1-240

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The WUV-1-240 protection relays & systems are widely used in many fields such as power systems, transmission systems and industrial control systems. It is a voltage transformer (WUV) equipped with a single-pole double-throw (SPDT) output contact that can be used for load protection, fault detection and short circuit protection. This device can be used in AC current systems as well as DC current systems.

The working principle of the WUV-1-240 protection relays & systems is based on voltage variations caused by load, fault or short circuit in the power system. The voltage across the secondary winding of the voltage transformer ratings (VTR) is proportional to the voltage between the two ends of the primary winding. When the voltages exceed the inrush and overload limits, the voltage transformer sends out an overload warning signal and closes the contact.

The WUV-1-240 protection relays & systems are designed to detect voltage on the primary and/or secondary taps and to immediately disconnect the power supply when an overvoltage condition occurs. This system is used to protect high voltage systems from over-voltage conditions. It also helps in protecting the power system from short circuit faults. In addition, it helps to control voltage surges, prevent long lasting disturbances and prevent fire hazards.

The WUV-1-240 protection relays & systems are mainly used to protect high voltage systems from over-voltage conditions. It is also used to detect short circuit currents and ground fault currents in the power system. It consists of an output contact and a control circuit with a voltage transformer and a protective relay. The protection relay and the transformer secondary winding are connected in series so that when the voltage difference between the primary and secondary windings exceeds the preset values, the protective relay trips and the device is de-energized.

When the fault current passes through the power system, the WUV-1-240 protection relays & systems trip and stop the flow of the current to prevent damage to the system and to protect the power devices in the system. It also helps in controlling voltage fluctuation and thus reduces power losses. The protection relay is also equipped with an adjustable timer for fast fault detection. This system is also used for time-delay starting of motors and other large equipment.

The WUV-1-240 protection relays & systems are widely used in industrial and commercial settings due to its wide range of features and capability to detect different types of faults. It is capable of detecting both high and low voltages as well as providing protection against short circuits, ground faults, over load and over voltage. This device is ideal for industrial and commercial settings where high voltage systems are present.

The WUV-1-240 protection relays & systems are designed to be easy to install, set up and configure. It can be installed in many types of environments and can be easily integrated into a variety of other systems. Its wide range of features makes it a must-have for any protection system.

In conclusion, the WUV-1-240 protection relays & systems is a highly reliable and highly efficient system that can detect problems quickly and prevent damage to the system. It is used in a wide variety of applications to protect high voltage systems from over-voltage conditions and short circuit faults. This protection device is ideal for industrial and commercial settings.

The specific data is subject to PDF, and the above content is for reference