WW10JT50R0

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	50 Ohms
Tolerance:	±5%
Power (Watts):	10W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 1.780" L (9.53mm x 45.21mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors WW10JT50R0 is a type of through hole resistor. As one of the standard components in the electronics industry, it is usually used in circuits for resistance, current limitation, voltage division, and temperature compensation. Its application field and working principle will be discussed in this section. The WW10JT50R0 through hole resistor has a wide range of applications in various electrical and electronic devices and circuits. It is often used as an electronic attenuator, voltage divider, dynamic brake resistor, or output overload limiter. In particular, it can be used in radio frequency applications when coupled with a capacitor in a filter circuit.When choosing a through hole resistor, one of the most important factors to consider is its working principle. The working principle of a through hole resistor is based on Ohm’s Law, which states that the current flowing through a conductor is proportional to the voltage applied across it. Generally, when a voltage is applied across the two ends of the resistor, a current will be equal to the voltage divided by the resistance of the resistor. This current will flow in the opposite direction to the voltage applied. Thus, the higher the value for the resistance, the lower the current flow. The WW10JT50R0 through hole resistor is designed to have a resistance of 50 ohms allowing for a selectable voltage to be applied across it for specific applications. It also has a tolerance of 10%, meaning that the resistance of the resistor can vary from 45 ohms to 55 ohms. This range of resistances allows the resistor to be used in different electronics projects for a wide variety of tasks.To ensure that the WW10JT50R0 through hole resistor can perform its task reliably, the component must also be able to dissipate the energy as heat. As the current passes through the resistor, the resistor will dissipate the energy as heat with the wattage being equal to the voltage multiply by the current. The higher the wattage, the higher the power dissipation and the higher the temperature. This is why it is important to choose a through hole resistor with a high power rating to make sure it will not overheat.Finally, the WW10JT50R0 through hole resistor has a temperature coefficient of around 10 ppm/K, which means that the resistance of the resistor will vary by about 10 parts per million (ppm) for every increase of 1 degree Kelvin in temperature. This makes it ideal for applications that require tight tolerance measurements and temperature compensation.In conclusion, the WW10JT50R0 through hole resistor is a reliable component for various tasks and projects in the electronics industry. Its application field is wide and its working principle is based on Ohm’s Law. It has a selectable voltage, resistance tolerance of 10%, high power rating, and temperature coefficient of 10 ppm/K. All these factors make it possible for this component to be used in a range of applications for reliable results.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description