Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through-hole resistor is a type of resistor that is designed to fit through a hole in a printed circuit board (PCB). The resistor is mounted to the PCB with two leads that are soldered to connect to the circuit. Through-hole resistors are bulky compared to surface-mount resistors and they take up more space on the PCB. However, they can be more reliable and easier to work with because of the increased contact area.

The WW12FB8R06 resistor is a through-hole type resistor that is used in many applications. It is a 12 watt resistor that is made from a ceramic material, and it is rated for a power dissipation of 7 watts and a voltage rating of 0.5 volts. The WW12FB8R06 is suitable for use in power electronics, amplifier circuits, and other circuits where high power dissipation is needed.

The WW12FB8R06 has two leads that are soldered to a printed circuit board. The PCB is drilled with a large hole, and the leads are threaded through this hole. The resistor is then mounted by soldering each lead to the board. This resistor has a chip-and-wire type construction that allows for a wide variety of terminations. It is also available in a variety of tolerance levels, from ±3% to ±20%.

The working principle of the WW12FB8R06 is fairly simple. Current flows through the resistor and generates heat, which is then dissipated through the heat sink. The amount of current that can be safely allowed through the resistor is determined by the power dissipation rating. The higher the power dissipation, the more current that can be safely allowed through the resistor. The voltage rating determines how much voltage can be applied across the resistor before it begins to fail.

The WW12FB8R06 can be used in a variety of applications, such as power supplies, motor controllers, and amplifier circuits. Its thermal characteristics make it suitable for use in high-power circuits. Its through-hole design makes it easier to work with, as opposed to surface-mount varieties. The wide variety of termination options make it easy to tailor the resistor to the particular application needs.

The specific data is subject to PDF, and the above content is for reference