WW12FT84R5

Through hole resistors are among the most common components used in most electronic systems and circuits. A through hole resistor is a passive component with two lead terminals that pass through a cylindrical casing filled with resistive material. The WW12FT84R5 is a through hole resistor with a 12-turn resistance value, a tolerance of ±8%, and a maximum power rating of 500 mW.

The most common application of the WW12FT84R5 through hole resistor is in voltage divider circuits. This type of configuration is useful for dividing an input voltage into two separate, adjusted output voltages. The resistance value of the resistor can be used to calculate the ratio of the output voltages. Other applications include use in media filters, active bias components, and overcurrent protection circuits.

The working principle of the WW12FT84R5 through hole resistor is based on Ohm’s Law. This law states that the current passing through a conductor is directly proportional to the voltage across it, provided the temperature remains constant. This enables the resistor to control the flow of electric current in a circuit by simply adjusting the resistance value. This, in turn, helps to regulate the current and Voltage in the system, ultimately protecting components and circuit boards from damage due to overvoltage and excessive current.

The resistance of a WW12FT84R5 through hole resistor is usually measured in ohms. This value is determined by the type of material used to manufacture the resistor. Common materials include carbon, metal and carbon-ceramic composites. These materials are chosen for their high resistance and stability. The resistance of a through hole resistor is also determined by the number of turns that make up the doping winding around the resistor core. In the case of the WW12FT84R5, theresistance value is 12 turns.

In conclusion, WW12FT84R5 is a through hole resistor with a 12-turn resistance value, a tolerance of ±8%, and a maximum power rating of 500 mW. The primary application of this resistor is in voltage divider circuits. The working principle of this resistor is based on Ohm’s Law, which enables it to regulate the flow of electric current in a circuit. The resistance of the resistor is measured in ohms, and is determined by the type of material used, as well as the number of turns in the doping winding.