Allicdata Part #: | WW1AJT10R0-ND |
Manufacturer Part#: |
WW1AJT10R0 |
Price: | $ 0.13 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 10 OHM 1W 5% AXIAL |
More Detail: | 10 Ohms ±5% 1W Through Hole Resistor Axial Moistur... |
DataSheet: | WW1AJT10R0 Datasheet/PDF |
Quantity: | 1000 |
2500 +: | $ 0.11835 |
Series: | WW |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 10 Ohms |
Tolerance: | ±5% |
Power (Watts): | 1W |
Composition: | Wirewound |
Features: | Moisture Resistant |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 350°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.110" Dia x 0.375" L (2.79mm x 9.53mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are resistors that can be found in almost any electronic circuit. They are the most common type of resistor and come in a variety of physical sizes and shapes. The WW1AJT10R0 is a through hole resistor that is made specifically for applications that require absolute precision. It is able to provide accurate and stable resistance values across a wide range of temperatures and is usually applied in critical control and measurement applications.
The most important characteristic of the WW1AJT10R0 is its ability to provide absolute precision. Through hole resistors are typically used for applications such as power supplies, control systems, and signal processing where accuracy is essential. The WW1AJT10R0 is designed to provide extremely precise resistance values that will remain stable and consistent regardless of temperature fluctuation or other environmental conditions. This makes them ideal for use in a wide variety of electronic control and monitoring applications.
The WW1AJT10R0 also features a high power rating. These resistors have a maximum power rating of 10 watts, which is significantly higher than most other through hole resistors, making them suitable for use in applications that require a large amount of power to operate. The high power rating also helps to ensure that the resistor will be able to dissipate any excess heat caused by an overload or temperature increase.
The construction of the WW1AJT10R0 is another important feature that sets it apart from other through hole resistors. The WW1AJT10R0 features a unique ceramic substrate that is designed to provide superior mechanical durability and thermal stability. The ceramic substrate also allows the resistor to withstand extreme temperatures without the risk of damage or degradation. This makes them particularly suitable for use in high temperature environments and ensures that the resistor will remain reliable in challenging conditions.
The working principle of the WW1AJT10R0 is based on the same principle as all other resistors: electrons flow through a conductive material, and as they do, they encounter resistance. This resistance is measured in Ohms and is determined by the material used in the resistor. The WW1AJT10R0 is constructed using special filament wires that are designed to provide consistent and precise resistance values across a range of temperatures. This means that the resistor is able to provide an accurate and stable resistance value regardless of temperature fluctuation or other environmental conditions.
The WW1AJT10R0 through hole resistors are one of the most reliable resistors available and can be found in a wide variety of electronic circuits and applications. With their absolute precision and high power rating, they are ideal for use in critical control and measurement applications where accuracy and stability are essential. Their ceramic construction also ensures that they are able to withstand extreme temperatures without the risk of damage or degradation, making them an excellent choice for use in challenging environments.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WW1AJB1R00 | Stackpole El... | 0.14 $ | 1000 | RES 1 OHM 1W 5% AXIAL1 Oh... |
WW1AJB1K00 | Stackpole El... | 0.14 $ | 1000 | RES 1K OHM 1W 5% AXIAL1 k... |
WW1AFT4R00 | Stackpole El... | 0.15 $ | 1000 | RES 4 OHM 1W 1% AXIAL4 Oh... |
WW1AFT8R25 | Stackpole El... | 0.15 $ | 1000 | RES 8.25 OHM 1W 1% AXIAL8... |
WW1AFT6K19 | Stackpole El... | 0.16 $ | 1000 | RES 6.19K OHM 1W 1% AXIAL... |
WW1AJT150R | Stackpole El... | 0.13 $ | 1000 | RES 150 OHM 1W 5% AXIAL15... |
WW1AJT1K00 | Stackpole El... | 0.13 $ | 1000 | RES 1K OHM 1W 5% AXIAL1 k... |
WW1AJT10R0 | Stackpole El... | 0.13 $ | 1000 | RES 10 OHM 1W 5% AXIAL10 ... |
WW1AJT22R0 | Stackpole El... | 0.13 $ | 1000 | RES 22 OHM 1W 5% AXIAL22 ... |
WW1AFT1K91 | Stackpole El... | 0.16 $ | 1000 | RES 1.91K OHM 1W 1% AXIAL... |
WW1AFBR100 | Stackpole El... | 0.18 $ | 1000 | RES 0.1 OHM 1W 1% AXIAL10... |
WW1A24A-D8 | Honeywell Se... | 25.68 $ | 1000 | SWITCH SNAP ACT SPST-NO 3... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...