WW1FT1K43

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.43 kOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.110" Dia x 0.375" L (2.79mm x 9.53mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: What are Through Hole Resistors

Through-Hole Resistors, also known as TH resistors, are resistors that are attached to a circuit board using holes drilled into the board. The resistor leads are then inserted into the holes on the circuit board, and the resistor is soldered in place. TH resistors are typically used in industrial applications such as consumer products, lighting, motors, and more. They are a reliable and cost-effective way to add resistance in a circuit, and are often used in combination with other resistors and components in order to produce more complex circuits.

WW1FT1K43 Application Field and Working Principle

The WW1FT1K43 is a Through Hole Resistor designed for use in a wide range of industrial and commercial applications. It is a low power, non-inductive resistor that can be used in both DC and AC circuits. The resistor has a resistance of 1K Ohms and a tolerance range of ± 10%. It is a standard size, with a total length of 39.76 mm and a total width of 8.51 mm. The WW1FT1K43 can handle up to 2 W of power.The WW1FT1K43 works by creating a voltage drop across the resistor, based on the amount of current flowing in the circuit. This voltage drop is a result of the resistance in the component. By selecting the appropriate size resistor for the application, the required voltage drop across the resistor can be achieved. The Ohm rating of the resistor determines its resistance and is directly related to the voltage drop it will produce. By using a higher resistance resistor, the voltage drop will be higher.The WW1FT1K43 is designed to operate within a temperature range of -55°C to +125°C. It is rated for a maximum temperature rise of 80°C, which ensures that the component does not overheat and cause damage. The WW1FT1K43 is a reliable and long lasting resistor, with a typical life expectancy of over 10,000 hours.

Conclusion

The WW1FT1K43 Through-Hole Resistor is a reliable and cost-effective solution for a wide range of industrial and commercial circuit applications. The resistor is designed to handle up to 2 W of power, and can operate within a temperature range of -55°C to +125°C. It has a 1K Ohm resistance and ± 10% tolerance range, making it suitable for a wide range of circuits. The WW1FT1K43 is also a long lasting component, with a typical life expectancy of over 10,000 hours.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description