Allicdata Part #: | WW2ABB120R-ND |
Manufacturer Part#: |
WW2ABB120R |
Price: | $ 0.25 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 120 OHM 2.5W 0.1% AXIAL |
More Detail: | 120 Ohms ±0.1% 2.5W Through Hole Resistor Axial Mo... |
DataSheet: | WW2ABB120R Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.22145 |
Series: | WW |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 120 Ohms |
Tolerance: | ±0.1% |
Power (Watts): | 2.5W |
Composition: | Wirewound |
Features: | Moisture Resistant |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -55°C ~ 350°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.156" Dia x 0.550" L (3.96mm x 13.97mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are a type of resistor with two leads that are inserted directly into a printed circuit board through holes. These resistors can be used in various types of industrial, commercial and consumer applications. The WW2ABB120R is a type of through hole resistor that is used for a wide range of applications. The following article will discuss the application field and working principle of the WW2ABB120R.
The WW2ABB120R is a general purpose through hole resistor that is designed to handle up to 120 Watts of power. It is primarily used in power supplies, industrial motors, audio amplifiers and lighting circuits. This type of resistor can also be used in automotive and communications applications. It is designed for use in high-voltage, high-current applications, and it has a high breakdown voltage of 30 volts.
The WW2ABB120R is a very efficient type of resistor because it has low internal resistance. This means that it can handle large amounts of current without becoming hot. Because of its low resistance, the WW2ABB120R is also ideal for use in circuits that require high-precision voltage regulation and power throttling.
The WW2ABB120R is made of a special material called a dielectric. This material is a composite of graphite, silicon, and polyethylene. The material is designed to be highly resistant to electricity and heat. The WW2ABB120R is also protected against damage from static electricity, and it is capable of withstanding high voltages and temperatures.
The WW2ABB120R works by limiting the current passing through it. This is done by the resistance it creates within the circuit. The more current that is passed through the resistor, the more voltage is dropped across it. This creates a voltage potential difference between the two ends of the resistor, which is known as the resistor\'s voltage rating. By regulating the current through the resistor, the voltage drop across it can be used to control the power output of a circuit.
The WW2ABB120R is also able to dissipate heat efficiently. It does this by drawing in ambient air and allowing it to flow over the resistor. The air absorbs the heat that is generated by the resistor, and then it dissipates the heat into the surrounding environment.
The WW2ABB120R is a type of through hole resistor that is ideal for use in industrial, commercial, and consumer applications. It is highly efficient, and it can handle high current and voltage without causing damage. The WW2ABB120R is also designed to dissipate heat effectively, and it is resistant to static electricity. This makes it a great choice for use in power supplies, industrial motors, audio amplifiers, and lighting circuits.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WW2AJBR100 | Stackpole El... | 0.14 $ | 1000 | RES 0.1 OHM 2.5W 5% AXIAL... |
WW2AFTR100 | Stackpole El... | 0.15 $ | 1000 | RES 0.1 OHM 2.5W 1% AXIAL... |
WW2ADBR100 | Stackpole El... | 0.22 $ | 1000 | RES 0.1 OHM 2.5W 0.5% AXI... |
WW2AFB10R0 | Stackpole El... | 0.13 $ | 1000 | RES 10 OHM 2.5W 1% AXIAL1... |
WW2AJTR330 | Stackpole El... | 0.13 $ | 1000 | RES 0.33 OHM 2.5W 5% AXIA... |
WW2AJTR470 | Stackpole El... | 0.13 $ | 1000 | RES 0.47 OHM 2.5W 5% AXIA... |
WW2ABT250R | Stackpole El... | 0.24 $ | 1000 | RES 250 OHM 2.5W 0.1% AXI... |
WW2ABB120R | Stackpole El... | 0.25 $ | 1000 | RES 120 OHM 2.5W 0.1% AXI... |
WW2AJT10K0 | Stackpole El... | 0.18 $ | 1000 | RES 10K OHM 2.5W 5% AXIAL... |
WW2AJT150R | Stackpole El... | 0.12 $ | 1000 | RES 150 OHM 2.5W 5% AXIAL... |
WW2AJT120R | Stackpole El... | 0.12 $ | 1000 | RES 120 OHM 2.5W 5% AXIAL... |
WW2AJT220R | Stackpole El... | 0.12 $ | 1000 | RES 220 OHM 2.5W 5% AXIAL... |
WW2AJT8R20 | Stackpole El... | 0.12 $ | 1000 | RES 8.2 OHM 2.5W 5% AXIAL... |
WW2ADT39R2 | Stackpole El... | 0.18 $ | 1000 | RES 39.2 OHM 2.5W 0.5% AX... |
WW2AFT10K0 | Stackpole El... | 0.19 $ | 1000 | RES 10K OHM 2.5W 1% AXIAL... |
WW2AFT10R0 | Stackpole El... | 0.13 $ | 1000 | RES 10 OHM 2.5W 1% AXIAL1... |
WW2AFT20R0 | Stackpole El... | 0.13 $ | 1000 | RES 20 OHM 2.5W 1% AXIAL2... |
WW2AFT200R | Stackpole El... | 0.13 $ | 1000 | RES 200 OHM 2.5W 1% AXIAL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...