Allicdata Part #: | WW3AJT12R0-ND |
Manufacturer Part#: |
WW3AJT12R0 |
Price: | $ 0.13 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 12 OHM 3W 5% AXIAL |
More Detail: | 12 Ohms ±5% 3W Through Hole Resistor Axial Moistur... |
DataSheet: | WW3AJT12R0 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.11138 |
Series: | WW |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 12 Ohms |
Tolerance: | ±5% |
Power (Watts): | 3W |
Composition: | Wirewound |
Features: | Moisture Resistant |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -55°C ~ 350°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.187" Dia x 0.560" L (4.75mm x 14.22mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
WW3AJT12R0 Through Hole Resistors are widely used in various fields of application and are commonly used in those areas which require high-quality electronic components.
Through Hole Resistor design is based on a number of different electrical technologies. Resistor material is chosen to facilitate good power dissipation, maintain accurate resistance values, and reduce temperature sensitivity.The most common resistor sizes used in through hole installations are the two-terminal (SIP), the three-terminal (CON), and the four-terminal (SPD). These resistors can be supplied with lead-free terminations, as well as in surface-mount packages.
In the two-terminal (SIP) through hole resistor assemblies, one external resistor leg has an extra conductor layer that wraps around and under the main leg of the resistor. This wrapped conductor layer increases the distance between the external resistor legs, and thus, the current carrying capacity of the resistor assembly is increased. The three-terminal (CON) through hole resistor assemblies use one extra resistor leg that is insulated from the other two legs. By using this extra resistor leg, the total resistance of the resistor assembly is reduced, thus allowing for a higher current carrying capacity.
The four-terminal (SPD) through hole resistor assemblies are used when a high degree of accuracy is needed. In this application, an extra conductor layer is wrapped around and under the resistor body, and then soldered to the external resistor legs. In this way, the four-terminal (SPD) through hole resistor assembly offers a much higher degree of accuracy than the two-terminal (SIP) and three-terminal (CON) through hole resistor assemblies.
At the heart of the through hole resistor is the working principle of electrical conductivity. The working principle of the resistor is based on the concept of resistance, which is defined as the ratio of voltage across the resistor divided by the applied current passing through it. The working principle of the through hole resistor is based on the fact that the voltage across the resistor is directly proportional to the current passing through it.
The current passing through the resistor is determined by the applied voltage and the resistance of the resistor. As the applied voltage increases, the resistance of the resistor also increases, and the current passing through it decreases. The working principle of the through hole resistor also states that the resistance of the resistor also depends on the temperature of the resistor. As the temperature of the resistor increases, the resistance of the resistor reduces.
The application and working principle of the WW3AJT12R0 through hole resistor helps to determine the current through the resistor, which in turn helps to determine the output voltage from the resistor. Through hole resistor applications range from simple basic circuits to complex digital integrated circuits. Through hole resistor technology is also used in automotive electronic applications.
By utilizing resistors, users can control the voltage and current outputs on their electronic circuits, as well as regulate the output signals. The working principle of the through hole resistor helps to maintain its accuracy and accuracy requirements when assembling complex circuits.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WW3AT250R | Stackpole El... | 0.48 $ | 1000 | RES 250 OHM 3W 0.05% AXIA... |
WW3AJTR100 | Stackpole El... | 0.15 $ | 1000 | RES 0.1 OHM 3W 5% AXIAL10... |
WW3AJT6K00 | Stackpole El... | 0.15 $ | 1000 | RES 6K OHM 3W 5% AXIAL6 k... |
WW3AFTR100 | Stackpole El... | 0.2 $ | 1000 | RES 0.1 OHM 3W 1% AXIAL10... |
WW3AFTR200 | Stackpole El... | 0.2 $ | 1000 | RES 0.2 OHM 3W 1% AXIAL20... |
WW3AFTR330 | Stackpole El... | 0.2 $ | 1000 | RES 0.33 OHM 3W 1% AXIAL3... |
WW3AFT23R2 | Stackpole El... | 0.16 $ | 1000 | RES 23.2 OHM 3W 1% AXIAL2... |
WW3AFT47R0 | Stackpole El... | 0.16 $ | 1000 | RES 47 OHM 3W 1% AXIAL47 ... |
WW3AFT2R70 | Stackpole El... | 0.16 $ | 1000 | RES 2.7 OHM 3W 1% AXIAL2.... |
WW3AFT5R60 | Stackpole El... | 0.16 $ | 1000 | RES 5.6 OHM 3W 1% AXIAL5.... |
WW3AJT10K0 | Stackpole El... | 0.19 $ | 1000 | RES 10K OHM 3W 5% AXIAL10... |
WW3AJT10R0 | Stackpole El... | 0.13 $ | 1000 | RES 10 OHM 3W 5% AXIAL10 ... |
WW3AJT120R | Stackpole El... | 0.13 $ | 1000 | RES 120 OHM 3W 5% AXIAL12... |
WW3AJT130R | Stackpole El... | 0.13 $ | 1000 | RES 130 OHM 3W 5% AXIAL13... |
WW3AJB2R70 | Stackpole El... | 0.13 $ | 1000 | RES 2.7 OHM 3W 5% AXIAL2.... |
WW3AJT220R | Stackpole El... | 0.13 $ | 1000 | RES 220 OHM 3W 5% AXIAL22... |
WW3AJT27R0 | Stackpole El... | 0.13 $ | 1000 | RES 27 OHM 3W 5% AXIAL27 ... |
WW3AJB3R30 | Stackpole El... | 0.13 $ | 1000 | RES 3.3 OHM 3W 5% AXIAL3.... |
WW3AJT3R30 | Stackpole El... | 0.13 $ | 1000 | RES 3.3 OHM 3W 5% AXIAL3.... |
WW3AJT100R | Stackpole El... | 0.13 $ | 1000 | RES 100 OHM 3W 5% AXIAL10... |
WW3AJT12R0 | Stackpole El... | 0.13 $ | 1000 | RES 12 OHM 3W 5% AXIAL12 ... |
WW3AJT160R | Stackpole El... | 0.13 $ | 1000 | RES 160 OHM 3W 5% AXIAL16... |
WW3AJT180R | Stackpole El... | 0.13 $ | 1000 | RES 180 OHM 3W 5% AXIAL18... |
WW3AJT18R0 | Stackpole El... | 0.13 $ | 1000 | RES 18 OHM 3W 5% AXIAL18 ... |
WW3AJT200R | Stackpole El... | 0.13 $ | 1000 | RES 200 OHM 3W 5% AXIAL20... |
WW3AJT22R0 | Stackpole El... | 0.13 $ | 1000 | RES 22 OHM 3W 5% AXIAL22 ... |
WW3AJT40R0 | Stackpole El... | 0.13 $ | 1000 | RES 40 OHM 3W 5% AXIAL40 ... |
WW3AJT68R0 | Stackpole El... | 0.13 $ | 1000 | RES 68 OHM 3W 5% AXIAL68 ... |
WW3AJT910R | Stackpole El... | 0.13 $ | 1000 | RES 910 OHM 3W 5% AXIAL91... |
WW3AJT150R | Stackpole El... | 0.16 $ | 1000 | RES 150 OHM 3W 5% AXIAL15... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...