WW3FT1K00 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

WW3FT1K00 resistors are also known as through hole resistors, which are resistors with wire leads or terminals that pass through a hole in the board to reach the other side. These are the oldest of the resistor types, being in common usage for many decades. WW3FT1K00 resistors are generally favoured for operations where power dissipation and reliability is essential.

Application Field

WW3FT1K00 resistors are primarily used in electronic circuits for numerous applications such as voltage regulation, current limiting, wave shaping, power rating and impedance matching. They are also widely used in the process of thermal management. WW3FT1K00 resistors are preferred over surface mount resistors for motherboard prototyping and critical cooling systems as they can evenly transfer heat from one end to the other.

Working Principle

WW3FT1K00 resistors are variable resistors that control the amount of current through a circuit. They are basically composed of a resistive element and two electrodes. The behaviour of current flow depends on the value of the resistor\'s resistance, which in turn depends on the material used to construct it. WW3FT1K00 resistors are manufactured using various materials, such as carbon, metal or ceramic. These materials can be either pure or mixed in order to achieve a predetermined resistance. The resistance is then measured and marked with a colour code or a numerical value.

WW3FT1K00 resistors are used in circuits to resist the flow of electricity which in turn can be used to control the voltage, current and power. The resistor is a passive element that determines the amount of flow of electricity within a circuit. It utilizes the principle of Ohm’s law, which states that the current in a circuit is directly proportional to the voltage applied to the circuit. The resistance is inversely proportional to the current and is determined by the material it is constructed from.

When resistors are placed in a circuit, their electrical properties affect the performance of the circuit. This is because the resistance of a resistor affects the amount of current that can pass through the circuit. If the resistance is too high, the current will be minimal, while if the resistance is too low, the current will be excessive. Thus, the appropriate selection of resistors ensures the desired current flow and the proper functioning of a circuit.

The specific data is subject to PDF, and the above content is for reference