WWF2AJT5R60

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	5.6 Ohms
Tolerance:	±5%
Power (Watts):	2.5W
Composition:	Wirewound
Features:	Fusible, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.156" Dia x 0.550" L (3.96mm x 13.97mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: WWF2AJT5R60 Application Field and Working Principle

Through hole resistors are a type of resistor that forms an important component of many electronic circuits. These little, cylindrical, silver or black components are made up of non-conductive materials that limits the flow of current when an electric voltage is applied to the circuit. WWF2AJT5R60 is a particular type of through hole resistor, with an application field across different industries and working through a simple principle.The WWF2AJT5R60 is a 4-pin through hole resistor with a wattage rating of two watts and a voltage rating of sixty volts. This particular resistor has a tolerance of 5%, which is the accepted value of resistance variation from the nominal value. It is used across many industries including automotive, electronics, medical, aerospace, and instrumentation. The working principle of WWF2AJT5R60 is straightforward and relies on the concept of ohm’s law. Ohm\'s law states that when a resistor is placed in a circuit with an electrical voltage and a current flow, the resistance opposes the current. The resistance can be calculated from the voltage and the current values using the equation R = V / I, where R is the resistance in ohms, V is the voltage in volts and I is the current in amperes. At an atomic level, resistors are made up of atoms, and a certain amount of energy must be present in order to move an electron across the barrier created by the atom. When a voltage is applied to the resistor, the electrons can move through the resistive material and energy is dissipated. WWF2AJT5R60 resistors are made using a specific combination of materials that provide the required voltage and wattage ratings. The materials used can range from nickel-chromium alloys, to metal oxide semiconductor films. These materials are chosen since they possess a wide range of properties to allow for a resistance range of between 0 ohms and 1 megohm. Plus, resistance values can be tuned or selected by varying dopant concentration within the layers.When using a WWF2AJT5R60 it is important to remember that the resistance value will be affected by environmental conditions such as humidity, temperature, and altitude. This means that the resistance measurement should always be taken under the same environmental conditions and should not be allowed to vary too much. In conclusion, WWF2AJT5R60 is an extremely versatile through hole resistor that has a range of application across varying industries. Its working principle is simple and relies on the concept of ohm’s law, which states that the resistance opposes the current when a voltage is applied. The resistor is made up multiple layers of materials that offer a wide range of resistance values between 0 ohms and 1 megohm. It is crucial to ensure that the environmental conditions remain constant when measuring the resistor\'s changing resistance as it is affected by these conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description