Allicdata Part #: | X-10GS-B-ND |
Manufacturer Part#: |
X-10GS-B |
Price: | $ 29.90 |
Product Category: | Switches |
Manufacturer: | Omron Automation and Safety |
Short Description: | SWITCH SNAP ACTION SPDT 10A 30V |
More Detail: | N/A |
DataSheet: | X-10GS-B Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 27.18450 |
Ingress Protection: | IP00 |
Mechanical Life: | 1,000,000 Cycles |
Electrical Life: | 100,000 Cycles |
Operating Position: | 1.110" (28.2mm) |
Operating Temperature: | -25°C ~ 80°C |
Overtravel: | 0.062" (1.6mm) |
Differential Travel: | 0.007" (0.18mm) |
Pretravel: | 0.035" (0.9mm) |
Release Force: | 114gf |
Operating Force: | 510gf |
Features: | -- |
Series: | X |
Termination Style: | Screw Terminal |
Mounting Type: | Chassis Mount |
Actuator Type: | Round (Pin Plunger) |
Voltage Rating - DC: | 30V |
Current Rating: | 10A (DC) |
Switch Function: | On-Mom |
Circuit: | SPDT |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap action and limit switches are mechanical actuators used to control the flow of electricity and systems. Commonly used in auto, machine and electrical engineering, these switches vary greatly in design and construction. The X-10GS-B is a snap action, limit switch that is primarily used within the electronics industry, often inside computers and home appliances, for example. The specific function of the X-10GS-B is to trigger a short-circuit or to open/close a circuit when operating temperature reaches a predetermined value.
The X-10GS-B is designed with an activation operation range of -50℃ to + 70℃ and can be used in a variety of applications and environments. It has a linear action range of 0.5mm to 4mm, depending on the temperature and application. This makes it ideal for a wide range of applications where exact switching of the circuit is needed when the temperature rises or falls.
The snap action, limit switch features a small frame, ip54 grade and a high-contrast marking. It is also equipped with special, self-lubricating ball bearings and solid contacts. This ensures a high degree of accuracy, a longer service life, and is resistant to mechanical shock, vibration, and environmental wear.
The X-10GS-B also has two basic modes of operation – normally open (NO) and normally closed (NC). In NO mode, the switch is closed until temperature exceeds the predetermined level, at which point the circuit is opened and power is cut off. In NC mode, the circuit is closed until temperature rises and the switch opens, cutting off the power. This allows for increased safety and prevention of circuits from being left in an open and dangerous state.
The working principle of the X-10GS-B is based on the thermal expansion of a bimetallic strip inside it. The bimetallic strip is basically composed of two strips of different metals that heat up at different rates when the temperature rises. This causes the strip to bend, activating the switch and cutting off or activating the electrical current.
In conclusion, X-10GS-B is a snap action, limit switch that is able to switch a circuit on and off at predetermined temperatures. Its small frame, ip54 grade and self-lubricating ball bearings makes it perfect for industrial electronic equipment and home appliances providing reliable switching. As it is designed with two basic modes of operation – normally open (NO) and normally closed (NC) – it provides increased safety. The bimetallic strip inside the switch is the key factor that enables the X-10GS-B to successfully operate using thermal expansion in different applications.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V