X3C26P1-30S RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The X3C26P1-30S is a RF directional coupler suitable for many applications. It consists of two input ports, a coupled port and an output port. The input ports receive a signal which is fed to the coupling port and the output port. The X3C26P1-30S exhibits a coupling factor of 3dB and is designed to isolate the receive side of digital systems from unwanted out-of-band transmissions.

The X3C26P1-30S operates over a frequency band of 824MHz to 894MHz and offers a high directivity of 30dB. It is designed to be used in communication systems, such as cellular phones, mobile radio networks and Wide Area Networks (WANs).

The X3C26P1-30S can be used to increase signal isolation and enhance system performance by limiting unwanted signal to the receiver. It is designed to reduce the interfering signals that can degrade or disrupt communication. It also helps to reduce the noise floor while maintaining the signal-to-noise ratio.

The X3C26P1-30S uses a directional coupler design to split out coupled signals. In this type of application, the coupler acts like a 1:1 transformer. When a signal is input at the input ports, the two sides of the transformer will produce equal voltage levels, but out of phase. This out of phase difference creates the ‘coupling’ factor. The coupler will then output the coupled signal to the output port. The output port will typically have a higher signal level than the input ports.

The X3C26P1-30S is designed to be used in applications where a high isolation factor from unwanted signals is required. This type of directional coupler can be used to improve the signal-to-noise ratio, to increase the dynamic range of the system, or to increase the privacy of the user.

The X3C26P1-30S is an ideal solution for RF systems that require high performance, isolation, and dynamic range. Its high directivity and 3dB coupling factor make it suitable for a variety of RF applications. The directional coupler design reduces the noise floor and provides increased signal strength while maintaining the signal-to-noise ratio. The X3C26P1-30S is an easy to use and cost effective solution for digital communication systems.

The specific data is subject to PDF, and the above content is for reference