X4003M8IZ-2.7

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Type:	Simple Reset/Power-On Reset
Number of Voltages Monitored:	1
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	100 ms Minimum
Voltage - Threshold:	2.62V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	8-MSOP
Base Part Number:	X4003

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:The X4003M8IZ-2.7 is a high-performance power management integrated circuit (PMIC) used in embedded and industrial applications. It is classified as a supervisor, a set of integrated circuits installed on devices to monitor their power status. Supervisors are important for battery devices, as they help preserve the device\'s battery life. The X4003M8IZ-2.7 helps protect devices against sudden power loss, over-voltage, and over-temperature. Features:The X4003M8IZ-2.7 includes protection functions such as over-voltage, over-temperature, and power-on reset. It also has power supply voltage detection and powered reboot, both of which can be used to help preserve battery life and ensure that the device only consumes energy when required. Additionally, the X4003M8IZ-2.7 contains an embedded watchdog timer that can be used to help ensure that the device is running properly. This timer can also ensure that any software errors are detected and reset. The X4003M8IZ-2.7 contains an Automatic Power Save (APS) feature which can be used to control the power consumption of the device. This feature can be activated by pressing a single button, allowing users to quickly switch the device to low power mode, for example when it is not in use. This will help extend the battery life of the device. The X4003M8IZ-2.7 also includes an Emergency Pin (EP) feature. This feature will allow the device to be configured to keep the device running longer in an emergency situation, such as when the device\'s battery is almost empty and needs to be recharged. Finally, the X4003M8IZ-2.7 includes support for up to 12 different power regulation levels, allowing for more precise control over the device\'s power consumption. Applications:The X4003M8IZ-2.7 is designed primarily for use in embedded and industrial applications. Its wide range of protection and power-saving features make it well-suited for use in battery-powered devices, as these features can help to extend the battery life of these devices. Additionally, its wide range of power regulation levels make it well-suited for use in applications such as automotive systems and consumer electronics, where precise control over power consumption is necessary. Finally, its watchdog timer and emergency pin features make it suitable for use in safety-critical applications, such as medical devices, where the device needs to remain running even in emergency situations. Working Principle:The X4003M8IZ-2.7 works by monitoring the status of the power supply voltage supplied to the device. When the voltage is within the device\'s operating range, the X4003M8IZ-2.7 will enable the power control and protections features of the device. The X4003M8IZ-2.7 will also monitor the temperature of the device and activate its over-temperature protection features if the temperature breaches a specified threshold. Additionally, the X4003M8IZ-2.7 can be configured to use its Emergency Pin (EP) feature, which will enable the device to continue to operate even if the battery is nearly empty. This feature can help protect important data and information on the device. When configured to use its Automatic Power Save (APS) feature, the X4003M8IZ-2.7 will be able to limit the power consumption of the device when it is not actively in use. This can help preserve the battery life of the device. Finally, the X4003M8IZ-2.7 can be configured to use its watchdog timer feature. This feature can be used to detect and reset any software errors that may occur, ensuring that the device remains operational and secure. Conclusion:The X4003M8IZ-2.7 is a high-performance power management integrated circuit (PMIC) designed for use in embedded and industrial applications. It is classified as a supervisor and helps protect devices against sudden power loss, over-voltage, and over-temperature. Additionally, it contains an Automatic Power Save (APS) feature, an Emergency Pin (EP) feature, and a watch dog timer which can be used to help preserve the battery life of the device, keep the device running longer in an emergency situation, and detect and reset software errors, respectively. Overall, the X4003M8IZ-2.7 is an ideal solution for minimizing power consumption and regulating power levels in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description