Memory Type:	Non-Volatile
Base Part Number:	X9C104
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Operating Temperature:	0°C ~ 70°C
Resistance - Wiper (Ohms) (Typ):	40
Temperature Coefficient (Typ):	±300 ppm/°C
Tolerance:	±20%
Features:	--
Voltage - Supply:	5V
Series:	XDCP™
Interface:	Up/Down (U/D, INC, CS)
Resistance (Ohms):	100k
Number of Taps:	100
Number of Circuits:	1
Configuration:	Potentiometer
Taper:	Linear
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers

Digital Potentiometers, sometimes referred to as DigiTPot, are electronic devices used to control resistance values or voltages in an electrical circuit. They work by digitally controlling the “tap” of a potentiometer, which adjusts its resistance. The device is composed of an array of resistors and an integrated circuit (IC) that controls the opening and closing of the resistors. The X9C104SZT1 is a type of digital potentiometer, designed for applications such as adjustable voltage regulators, supply voltage monitoring, and zero-to-full voltage control. It is housed in a 3-pin SOT-23 package and offers resistance selection increments of 10kohm. It features low-power consumption and a wide operating voltage range of 2V - 16V. It is also non-volatile, meaning settings will not be lost when the power is switched off.The working principle of the X9C104SZT1 is simple. The device uses a wiper terminal which is connected to the P-side of the array of resistors and the W-side is left open, much like a conventional potentiometer. When the wiper is moved, it opens and closes various resistors. When the resistors are open, more resistance is added and when they are closed, less resistance is added. The amount of resistance is proportional to the voltage applied to the wiper. The resistance can be adjusted using two methods – digitally or through a manual control. The device can either be controlled by a digital input such as a pulse width modulated signal or a manually adjustable voltage on the wiper terminal. The resistance value can be set within a range of 10 adder resistors (each 10Kohm) within the array. This can be done by applying a voltage to the wiper terminal.The X9C104SZT1 is suitable for use in applications that require precise voltage setting and control, such as programmable power supplies, regulators, battery monitors and sensors. It can also be used in analogue to digital converters, automating processes and controlling the current of motors and circuits.The X9C104SZT1 digital potentiometer has a wide range of features, including a wide operating voltage range, low power consumption and a non-volatile configuration. It has been designed to provide precise and reliable control over resistance and voltage, making it an ideal choice for applications that require adjustable and programmable settings.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description