XC1736EVOG8C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

XC1736EVOG8C is an erasable programmable read-only memory (EPROM) used for storing configuration data for a field-programmable gate array (FPGA). This EPROM is a non-volatile memory solution from Xilinx, which is usually used to configure FPGA devices during system power up or programming. The XC1736EVOG8C is also available as a stand-alone device, allowing it to be reprogrammed in-system or in-circuit.

The XC1736EVOG8C is available in three packages: the 8-pin DIP (Dual In-line Package); the 8-pin SOIC (Small Outline Integrated Circuit); and the 10-pin TSSOP (Thin Shrink Small Outline Package). The device is also available in several density versions, from 128-bit to 1M-bit. The configuration data is stored in the EPROM through configuration instructions (CI) written to the device. The CI instructions are then converted into binary data, which is stored in the EPROM. The data is then read by the FPGA during initialization or programming.

The XC1736EVOG8C is designed to operate within the extended temperature ranges of -55°C to +125°C. It is powered with either 3.3or 5.0 volts, and is capable of an operating frequency of up to 50 MHz. Its access time is 25ns (maximum) while its operational current rating is 5mA at 5V and 12.5mA at 3.3V.

The XC1736EVOG8C uses the SRAM configuration cell as its basic block, which provides easy and consistent programming and reprogramming. Its cells are divided into wordlines and bitlines, allowing the data to be written from the wordlines and read from the bitlines. The device utilizes Flash Memory Technology to program the data, which provides fast write times and ensures data integrity. Additionally, the device supports a user-defined array location for custom products.

In terms of electrical characteristics, the XC1736EVOG8C features a high-speed write data recovery of 30ns and a write cycle time of 205ns. It also features a low voltage write capability, which allows the device to be programmed even at low analog supply voltages. Additionally, it features write protect (WP) and output enable (OE) pins to limit write access to the device. Finally, the Data Out pin of the EPROM is glitch-free, allowing it to be used in synchronous designs in addition to asynchronous designs.

The XC1736EVOG8C is used in a variety of applications. It is used in FPGA configuration, programmable logic array (PLA), programmable logic device (PLD), application-specific standard product (ASSP), as well as legacy system configurations. Additionally, it is used in in-circuit programming of FPGAs, allowing users to reprogram the FPGA without disconnecting clocked circuitry from the device.

In conclusion, the XC1736EVOG8C is a versatile, reliable, and cost-effective EPROM designed for the FPGA and other application logic configuration markets. It features advanced Flash MemoryTechnology for flexible programming, reprogramming, and data integrity. The device\'s low voltage internal write feature and glitch-free output make it ideal for synchronous and asynchronous applications, while its low power consumption and wide temperature range allow it to be used in a variety of environments. The XC1736EVOG8C provides a reliable and cost-effective solution for FPGA and other application logic configurations.

The specific data is subject to PDF, and the above content is for reference