XC17S200AVO8C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XC17S200AVO8C is a Configuration Programmable Read Only Memory (PROM) device developed by Xilinx Corporation and is used as the configuration storage medium for FPGA devices. The XC17S200AVO8C is also known as a one-time programmable configuration memory, since the device is only programmed once and cannot be altered afterward.

The XC17S200AVO8C is a CMOS -based memory device that consists of 200 words x 17 bits, allowing for a normally width configuration data of 3.4K bits per device. The specified read byte cycling and the two-chip selection plan provide a maximum data configuration performance. The XC17S200AVO8C has power-up and power-down circuitry to protect the data in the PROM from accidental erasure or alteration.

The XC17S200AVO8C is mainly used for the configuration of Xilinx FPGA devices. It is used to store the bitstream data which is used to program and configure the FPGA device. This allows the FPGA device to be programmed and reconfigured in the field easily. The advantage of using the XC17S200AVO8C is that it requires very little power to run and provides a reliable storage medium for the programming and configuration data.

The operation of the XC17S200AVO8C involves the use of two chip enable lines. The first enable line is used to allow a read operation to the memory while the second enable line is used to perform a write operation to the memory. The read and write operations are performed in a two-chip selection mode with the Select pin used to determine which chip is being read from or written to. The read or write operation is performed by supplying the desired address on the Address bus and allowing the data to be read from or written to the selected address.

The data stored in the XC17S200AVO8C can be used to configure the Xilinx FPGA using the JTAG port of the FPGA. The data is read from the XC17S200AVO8C and then sent to the FPGA device via the JTAG data lines. The FPGA then checks the configuration data and then programs and configures its internal logic accordingly.

The XC17S200AVO8C device is widely used as an economical and reliable configuration storage medium for Xilinx FPGA devices. It is a low-power and low-cost memory device that provides a reliable storage solution for configuration and programming data. The XC17S200AVO8C is a cost-effective solution for Xilinx FPGA applications.

The specific data is subject to PDF, and the above content is for reference