XC6108C12AMR-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Integrated circuits are increasingly playing an important role in the design of power management and system protection for devices and systems. As one of the kinds of PMIC (Power Management Integrated Circuits), XC6108C12AMR-G provides comprehensive protection for various types of applications from the leading manufacturers of digital devices, with annealed current detection, watchdog timer protection and power supply design. This article provides an overview of the application field and working principle of XC6108C12AMR-G.

XC6108C12AMR-G is mainly suitable for industrial applications, such as cameras, PDAs, TV sets, STBs, automotive power systems, desktop computers, and so on. Among them, industrial applications require the highest standards of reliability, and both current detection and timer protection are necessary. This is where XC6108C12AMR-G comes into play, as it provides both current detection and watchdog timer protection.

XC6108C12AMR-G current detection is based on the Hall effect. When current passes through the hall element, a voltage is generated which can be converted by the hall amplifier into a detectable voltage. The hall amplifier then converts the voltage into a digital signal, and then communicates with the microcontroller of the system. When the current is greater than the set value, the system will automatically enter protection state.

The watchdog timer protection feature of XC6108C12AMR-G is based on the 30 KOhm resistor. This resistor is connected to a timing capacitor and the microcontroller of the system. When the microcontroller is operating normally and the timing capacitor has sufficient voltage, the time constant established by the resistor and the capacitor provides enough protection for the entire system. However, if the microcontroller fails to operate normally, the system will enter into the protection state by monitoring the voltage of the timing capacitor.

In addition, XC6108C12AMR-G also adopts a good power supply design, which adjusts the input voltage to provide the required source for the various components of the system. This provides power protection for the components, as it monitors the input voltage in order to adjust the power supply accordingly.

XC6108C12AMR-G is a PMIC - Supervisors, which provides comprehensive protection for various types of applications from leading digital device manufacturers. It uses the Hall effect to monitor the current, and the resistor and capacitor to monitor the voltage in order to provide protection for the system. In addition, it also has a good power supply design to provide the necessary voltage to the components of the system.

The specific data is subject to PDF, and the above content is for reference