XC6109N30ANR-G Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XC6109N30ANR-G is a low voltage detection supervisor circuit that is classified as a part of the Power Management IC (PMIC) - Supervisors. This is an integrated monolithic circuit used in general purpose consumer applications. It helps to provide high accuracy line monitoring and power monitoring for precise reset control.

The main application of the XC6109N30ANR-G is to ensure that the voltage is in specified range and to reset the system if the voltage gets out of the range. It has three thresholds which are adjustable with an external resistor: VLF, VCC and O/P OFF. The VLF (Low Voltage Level Setting Pin) pin monitors the power line voltage and activates the output whenever the voltage drops below VLF. The VCC (High Voltage Level Setting Pin) pin monitors the power line voltage and activates the output when the voltage exceeds VCC. The O/P OFF (Output Pull Input Pin) pin is used to disable the XC6109N30ANR-G output and make it the non-active state if needed when the power line voltage is above or below the VCC/VLF levels.

The XC6109N30ANR-G also provides the over-voltage protection which is important for any system where multiple power sources are available. It can prevent an illegal voltage level to combine with the other power supplies connected to the system. In addition to this, it has a self-diagnostic protection which is useful in detecting the bad condition of the supply lines.

The working principle of the XC6109N30ANR-G is based on the voltage detection of the power line voltage pin. The XC6109N30ANR-G uses a comparator circuit to detect the voltage difference between the power line voltage input and the VCC/VLF reference. When the voltage drops below the VLF reference, the comparator circuit will activate the output. When the voltage exceeds the VCC reference, the comparator circuit will activate the output. The XC6109N30ANR-G also has an O/P OFF pin which can be used to disable the output. The XC6109N30ANR-G uses a Delayed Linear On/Off timer that controls the output latency time when the power line reaches the VCC or VLF levels.

The XC6109N30ANR-G is a versatile supervisor circuit that is suitable for multiple applications including industrial and consumer electronics. The circuit is able to handle wide range of input voltages and also provide accurate voltage and reset control. It is a low cost solution which is suitable for most applications. While the XC6109N30ANR-G is an excellent choice for any power management system, it should be used with caution and proper supervision.

The specific data is subject to PDF, and the above content is for reference