XC6120C272HR-G Datasheet/PDFThe XC6120C272HR-G is an integrated PMIC (Power management IC) - supervisor device manufactured by XC6120 company. Specifically targeting mobile and consumer electronics, this device offers extensive power management capabilities in a single package. The supervision of the power sources is handled with ultra-low power consumption and long duration hold-up time. This PMIC also allows the system to easily respond to power-off and power-on conditions, thus making it a perfect fit for consumer electronics.
The XC6120C272HR-G is a CMOS-based device with three power outputs. It is capable of regulating 3.3V, 5V and 12V voltages. The device is also equipped with an over-current protection feature, which trips off in case of currents exceeding a predetermined threshold. The device also features a wide temperature operating range of -40°C to 125°C and has high reliability levels to ensure long life expectancy.
The supervisor capabilities of the device are powered by two base components - the Wafer Scale Package (WSP) and the Monitor IC. The WSP is an integrated passive device which monitors the power inputs and outputs of the system and signals when any of these values exceed the presets. The Monitor IC is a discrete IC which provides the control, reset and enable signals for the system. This IC is connected directly to the main power sources and is responsible for monitoring the voltage and current levels of the system. When the preset limits are exceeded, the Monitor IC will provide a reset signal, which can be used to perform system reset or to enable the external reset logic.
The XC6120C2R2HR-G is capable of monitoring under-/over-voltage, under-/over-current, power-on reset and power-off reset conditions. A wide variety of ways is available to configure the device. The device can be programmed with external resistors or by using its control pins. In addition, the device also supports an I2C and JTAG interface for programming the device indirectly.
The design of the XC6120C272HR-G was done keeping in mind the needs of consumer electronics products. The device offers good compatibility with various types of operating systems and can even be integrated into various consumer electronics circuitry. The device features wide angle protection for over-/under-voltage and over-/under-current conditions, thus providing reliable control and safety for consumer electronic projects.
Conclusion
The XC6120C272HR-G is an integrated PMIC – supervisor device with extensive capabilities. It is capable of monitoring 3.3V, 5V and 12V voltages with maximum accuracy. It also has the ability to detect under-/over-voltage, under-/over-current, power-on reset and power-off reset conditions. With an extended temperature operating range and support for various programming interfaces, the XC6120C272HR-G is an ideal solution for consumer electronics and mobile applications.