XC6121A542ER-G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Watchdog Circuit
Number of Voltages Monitored:	1
Output:	Open Drain or Open Collector
Reset:	Active Low
Reset Timeout:	400 ms Typical
Voltage - Threshold:	4.2V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	6-UFDFN Exposed Pad
Supplier Device Package:	6-USPC (1.8x2)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionThe XC6121A542ER-G is a low power, low-cost Supervisor chip that is widely used in power management applications. It provides a wide range of features to control the functioning of external circuits and devices. This chip has been designed to provide quick, reliable and accurate regulation to operating systems.This device is capable of operating in environments with low input voltages and current. Its output voltage and current can be adjusted through its built-in resistors and capacitors. Thus, it can monitor and control the supply voltage for various integrated circuits.FeaturesThe XC6121A542ER-G is a mature technology which is packed with features and offerings. It is used in a wide range of applications such as Processors, microcontrollers, and embedded systems. The chip offers a variety of protection features. Itincludes Under Voltage Lock Out(UVLO), Thermal protection, Latch Off Protection, Current Limitation, and Over Voltage Protection. The XC6121A542ER-G has varied reset times such as system reset and manual reset. It also provides multiple channels with independent voltage and current for different systems. Its power supply sub-circuits are protected from input voltage and current fluctuations.The XC6121A542ER-G has a wide range of output current, which allows the device to provide a stable and adjustable output current level across its entire operating range.It has a wide input voltage range which can easily match the supply voltage from 3V to 35V. The device has a very low quiescent current of 3uA and its output voltage range is adjustable from 0.7V to 7.85V. ApplicationsThe XC6121A542ER-G is used in a wide range of applications such as in microprocessors, voltage regulators, power supplies, and other similar systems. The device is used to provide safe and reliable power through the power supply sub-circuits. It can also be used in low-side and high-side switching applications. It is also used in power management systems where the device can be used to regulate the current and voltage flows, or to provide over-current protection for the system components. The device is also employed in load balancing applications where it helps to distribute the load among various components equally. Another application of the XC6121A542ER-G is as a high-side switch, where it can be used to close or open a circuit based on a certain voltage. In addition, the device can be used to prevent reverse currents or out of range voltage and current levels. Working PrincipleThe working principle of the XC6121A542ER-G is based on the control of voltage and current levels. It has two input pins, one for the input voltage and another for the reference voltage. The reference voltage can be adjusted to adjust the output current while the output voltage can be adjusted through its built-in resistors and capacitors. The XC6121A542ER-G has multiple protection features such as under-voltage lockout (UVLO), current-limiting,thermal protection, and over-voltage protection. These features are used to monitor the input voltage and the current of the system, and to shut down the circuit if the limits are exceeded. The device also has multiple channels with independent supply voltages and currents, which can be set to specific levels.The output voltage is adjusted through a feedback loop, where the voltage feedback signal is compared to the reference voltage, and the output current is adjusted accordingly.ConclusionIn conclusion, the XC6121A542ER-G is a low cost, low-powered Supervisor chip that has been designed to provide reliable and accurate regulation to integrated circuits and circuits. It has a wide range of features, to control various parameters such as the output voltage and current. It has various protection features to protect against input voltage and current fluctuations and out of range voltage and current levels. It also has multiple channels with independent supply voltages and current, which can be adjusted to provide the desired output voltages and currents.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description