XC61GC1002HR-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Supervisors refer to supervisory circuits that promote the reliable and safe operation of integrated circuits (ICs). One of the most common devices in this category is XC61GC1002HR-G. This product is a low voltage detection single-channel supervisor IC that allows for reset functionality. It is suitable for a wide range of power-up reset and line tracking solutions, and it is configured easily with optional external resistors.

The XC61GC1002HR-G is used to detect voltage conditions and establish reset sequences in order to correctly control a system\'s power. Many applications require this kind of circuit for enhanced power management such as automotive, consumer electronics, appliance and computing applications. Within automotive systems it is commonly used in car navigation and safety systems. In consumer electronics the device is used in many applications like Set-Top-Box (STB), digital cameras and gaming consoles. For appliances it is used in security systems, temperature control, and access control systems. In computing applications, XC61GC1002HR-G is employed in sensing power up, power fail and brown-out conditions.

In terms of operation, the XC61GC1002HR-G is a low voltage detection device that can detect voltages that are below a specific set level. After the voltage is detected, the device asserts a reset signal. This reset signal could be active low (LOW) or active high (HIGH) based on the configuration. The XC61GC1002HR-G monitors the detected voltage level and determines whether to assert the reset signal or not. It also has the ability to detect voltage levels for both low and high levels.

In order to configure the XC61GC1002HR-G, its RESET output interface pin must be connected to one of two potential outputs. The first is an active LOW output, which is indicated when the voltage is below the threshold. The second is an active HIGH output, which is indicated when the voltage is above the threshold. In order to decide which output to use, it is necessary to set the voltage threshold by configuring the RTF and BV pins.

The XC61GC1002HR-G uses two threshold selection inputs in order to properly calculate the reset assertion signal. The RTF pin determines when the device should start to assert a LOW signal, and the BV pin governs at what voltage the device should begin to assert a HIGH signal. Both the RTF and BV pins can be configured using external resistors, depending on the desired voltage level.

Once the device is configured, it will start to detect the selected voltage level. If the device detects a voltage below the LOW level, then it will assert a LOW signal. If the voltage is within the voltage range or above the HIGH level, the device will assert a HIGH signal. As soon as the reset signal is asserted, it will remain in that state until the voltages drop below the HIGH or LOW levels.

The XC61GC1002HR-G is a simple and cost effective way to implement reset functionality that allows for reliable and safe control of the power systems. It is an ideal choice for a variety of applications and serves a wide range of reset requirements. With its wide range of features, the XC61GC1002HR-G is an excellent choice for a wide variety of power-up and line tracking solutions.

The specific data is subject to PDF, and the above content is for reference