XLH536010.625000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators play an important role in circuits, since they provide a steady, repetitive signal. One type of oscillator is the XLH536010.625000X, which is a type of Sawtooth Wave Oscillator. It is used in many applications such as industrial control systems, test and measurement equipment, and audio equipment.

The XLH536010.625000X oscillator is a square wave oscillator, meaning it produces a symmetrical waveform. The frequency of the waveform produced is determined by the external components (capacitors and resistors) connected to the oscillator. The oscillator\'s frequency is set by the external components, and the amplitude is adjustable using a trimmer inside the oscillator. The oscillator\'s output impedance is approximately 120 ohms and is measured across the two output pins.

The XLH536010.625000X is a low power, low cost, and low noise oscillator. It is also designed to be very stable, and the frequency output can be adjusted over a wide range, from 10 Hz to 1 MHz. The oscillator also offers protection against possible damage from power surges or over current conditions.

The oscillator works by generating a sawtooth waveform. This is done by charging and discharging a capacitor and opening and closing a switch. The capacitor is charged by a constant current source, and as the capacitor charges the voltage increases until it reaches the maximum threshold voltage. At this point, the switch is opened, and the capacitor begins to discharge, causing a downward sawtooth voltage. When the voltage reaches the minimum level, the switch is closed, and the cycle starts again.

This oscillator is used in applications such as industrial control systems, test and measurement equipment, and audio equipment. In industrial control systems, the oscillator is used to generate a square wave signal for pulse-width modulation and digital control. In test and measurement equipment, the oscillator can be used as a signal generator to produce a test signal for analyzing and troubleshooting circuits. In audio equipment, the oscillator is used to generate a steady pulse for pulse-width modulation for audio amplifiers.

In conclusion, the XLH536010.625000X Sawtooth Wave Oscillator is a low cost and low noise oscillator that is used in many applications. It is a square wave oscillator and the frequency is adjustable over a wide range, from 10 Hz to 1 MHz. The oscillator is used in industrial control systems, test and measurement equipment, and audio equipment. It works by charging and discharging a capacitor and opening and closing a switch, which generates a sawtooth waveform.

The specific data is subject to PDF, and the above content is for reference