XLL530054.000000X

Frequency Stability:	±100ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.203" L x 0.132" W (5.15mm x 3.35mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	100mA
Operating Temperature:	-20°C ~ 70°C
Series:	XPRESSO™ FXO-LC53
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	54MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators - XLL530054.000000X Application Field and Working Principle

Oscillators are electronic components that generate a periodic electrical signal. This signal can be used in any number of applications, from the timing of computers to audio synthesis and signal processing. The XLL530054.000000X is a specific type of oscillator that is widely used in industry and research. This article examines its application field and working principle.

Application Field

The XLL530054.000000X is an amplifier-type oscillator designed for industrial and research applications. It is typically used to generate high-frequency sine or square waves, or to generate frequency multiplication or harmonic mixing. Because it has a wide operating bandwidth of 250 kHz to 1 GHz, it can be used in applications ranging from radio and television broadcasting to scientific instrument design.The XLL530054.000000X is also used in applications that require a high level of accuracy. For example, it is often used in timekeeping and clock synchronization systems, where it is required to accurately generate precise oscillations from a fraction of a microsecond up to several milliseconds. It can also be used in other applications that require precise timing, such as communication systems and motor control systems.

Working Principle

The XLL530054.000000X is an amplifier-type oscillator, which means that it uses an amplifier circuit to sustain oscillations. It has an input stage, a feedback stage, and an output stage. The input stage converts the input signal into a voltage. The feedback stage then applies negative feedback to the input stage, which amplifies the signal. Finally, the output stage takes the amplified signal and converts it into a continuous output signal.The frequency of the output signal depends on the type of feedback applied to the amplifier circuit. The XLL530054.000000X can be configured with different feedback types, allowing it to be used for a variety of applications. The two most common types of feedback are positive feedback and sinusoidal feedback.Positive feedback occurs when a portion of the output signal is fed back to the input stage. This causes the amplifier to amplify the signal further, resulting in a higher frequency output signal. The output frequency is determined by the frequency of the signal fed back to the input stage, as well as the gain of the amplifier.Sinusoidal feedback occurs when a portion of the output signal is fed back to the input stage, but it is shifted in phase so that it is exactly out of phase with the input signal. This causes the amplifier to amplify the signal in an oscillatory manner, resulting in a sine wave output. The frequency of the output signal is determined by the feedback frequency and the gain of the amplifier.

Conclusion

The XLL530054.000000X is an amplifier-type oscillator that is widely used in industrial and research applications. Its wide operating bandwidth makes it suitable for a variety of applications, such as radio and television broadcasting, timekeeping and clock synchronization systems, and communication systems. The XLL530054.000000X can be configured with different types of feedback, allowing it to generate both high-frequency sine waves and harmonic mixing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description