XR3071XIDTR-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

XR3071XIDTR-F Application Field and Working Principle

XR3071XIDTR-F is a member of Exar Corporation\'s XR3071 series, cable transceivers. This particular component is frequently used for data transmission in digital communication systems. It is a standard UART transceiver component found in many products in the telecom and automotive industries. The XR3071XIDTR-F is used in serial data transmission applications. It is capable of both full-duplex and half-duplex serial UART communication interface.

This component consists of a single non-inverting port with a maximum data rate of 1 Mbps. The signal level is TTL/CMOS compatible and that signal has an idle state of +12.0V. This component also has a signal current of 1.5mA and material temperature range of -40°C to 85°C. Since it is an asynchronous component, it is commonly used in applications where the communication rate and protocol do not need to be specified.

Interface - Drivers, Receivers, Transceivers

The XR3071XIDTR-F is one of the many serial transceiver devices used in modern digital communication and automation designs for both wired and wireless applications. Like other transceiver components, the XR3071XIDTR-F provides functionality as a driver and receiver. As a driver, the component transmits a digital signal from its output pin. As a receiver, it captures digital signals from its input pin.

As a driver, the XR3071XIDTR-F outputs digital signals at TTL/CMOS levels. The signal current for TTL-level signals is 1.5mA, with an idle state of +12.0V. The frequency of the signal depends on the data rate specified in the application and the bus cable. The maximum data rate is 1Mbps.

As a receiver, the XR3071XIDTR-F captures digital signals at TTL/CMOS levels. The idle line voltage is +12.0V, with a signal current of 1.5mA. The XR3071XIDTR-F supports both half-duplex and full-duplex operation. Half-duplex applications require one wire per direction while full-duplex operation requires two wires.

The XR3071XIDTR-F component also supports asynchronous and synchronous modes of communication. Asynchronous mode requires that both receiver and transmitter be aware of the communication protocol and that incoming data is serial in nature. This component is capable of full-duplex, self-clocking serial data transmission.

Synchronous mode requires both sender and receiver to agree on the protocol and send a specific data packet. In this mode, the component receives data in blocks. It uses clock signal from the sender and the clock signal from the receiver to sync the transmitted signal. Synchronous mode also supports multi-directional transmission, where signal can be sent both ways.

Applications

The XR3071XIDTR-F transceiver component is designed mainly for digital communication applications. It is frequently used in telecom and automotive applications. It is also used in industrial and home automation systems, where it is used to transmit data between sensors, controllers, and other devices. It is also used in computer networks, where it is used to send data between computers or over a Local Area Network (LAN).

The XR3071XIDTR-F is a versatile and convenient component for many digital communication and data transmission applications. Its low power requirements, high data rate support and adaptability to multiple protocols makes it a great candidate for any data transmission needs.

The specific data is subject to PDF, and the above content is for reference